|
|
NS-205PFC-24V - Multi-mode, SC Connector, 4-port 10/100 Mbps. by ICP DAS
|
|
|
NS-205PFC-24V_SUMMARY.html
- Provides 1 x 100-FX fiber port plus 4 x Ethernet ports
- Each port supports both 10/100 Mbps speed auto negotiation
- Store-and-forward architecture
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- 4 PoE ports with Power Sourcing Equipment (PSE) operation
- Automatic MDI/MDI-X crossover for plug-and-play
- Auto-detection of PD (powered devices) and automatic power management
- Over-temperature, over-current and over/under-voltage detection
- Supports operating temperatures from -30 ~ +75 C
- DIN-Rail Mounting
|
|
|
NS-205PFC-24V_DESCRIPTION.html
NS-205PFC-24V - Multi-mode, SC Connector, 4-port 10/100 Mbps.
NS-205PFC-24V.html
Standards
|
IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
|
Processing Type
|
Store & forward; wire speed switching
|
MAC Addresses
|
1024
|
Memory Bandwidth
|
3.2 Gbps
|
Frame Buffer Memory
|
512 Kbit
|
Flow Control
|
IEEE 802.3x flow control, back pressure flow control
|
RJ-45 Ports
|
10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
|
LED Indicators
|
Power, Link/Act, Power Device is detected
|
Ethernet Isolation
|
1500 Vrms 1 minute
|
+/-4 kV ESD Protection
|
Yes
|
Fiber Interface (100 Base-FX; SC/ST type)
|
Multi-Mode
|
NS-205PFT/FC NSM-205PFT/FC NS-205PFT-24V/FC-24V NSM-205PFT-24V/FC-24V
|
Multi mode fiber cables: 50/125, 62.5/125 or 100/140 µm Distance: 2 km, (62.5/125 µm recommended)
for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -20 dBm Max. TX Output: -14
dBm Max. RX Sensitivity: -32 dBm Min. RX Overload: -8 dBm Budget: 12 dBm
|
|
|
|
Single-Mode
|
NS-205PFCS NSM-205PFCS NS-205PFCS-24V/FCS-24V NSM-205PFCS-24V/FCS-24V
|
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 µm Distance: 30 km, (9/125 µm
recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -15 dBm Max. TX
Output: -8 dBm Max. RX Sensitivity: -34 dBm Min. RX Overload: -5 dBm Budget: 19 dBm
|
|
|
|
Single-Mode
|
NS-205PFCS-60 NSM-205PFCS-60 NS-205PFCS-60-24V/FCS-60-24V NSM-205PFCS-60-24V/FCS-60-24V
|
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 µm Distance: 60 km, (9/125 µm
recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -5 dBm Max. TX
Output: 0 dBm Max. RX Sensitivity: -35 dBm Min. RX Overload: -5 dBm Budget: 30 dBm
|
|
|
|
Input Voltage Range
|
+18 ~ +32 VDC
|
Power Consumption
|
0.24 A @ 24 VDC without PD loading; 3.2 A @ 24 VDC with PD full loading; 4.6 A @ 18 VDC with
PD full loading
|
Protection
|
Power reverse polarity protection
|
+/-4 kV ESD Protection
|
Yes
|
Connector
|
3-Pin Removable Terminal Block
|
PoE Compliance
|
100% IEEE 802.3af compliant
|
PoE Classification
|
PSE (Power Sourcing Equipment)
|
PoE Voltage
|
+48 VDC depending on power input
|
PoE Voltage
|
Up to 15.4 watts per channel
|
PoE Operation
|
Automatic detection and power management
|
PoE Pin assignments
|
V+ (Pin 1,2), V- (Pin 3,6)
|
PoE disconnect mode
|
DC disconnect
|
Casing
|
Plastic (Flammability UL 94V-0)
|
Dimensions (W x L x H) (Unit: mm)
|
31 x 157 x 113
|
Installation
|
DIN-Rail Mounting
|
Operating Temperature
|
-30 C ~ +75 C
|
Storage Temperature
|
-40 C ~ +85 C
|
Ambient Relative Humidity
|
10% ~ 90% RH, non-condensing
|
|
l');
?>
|