|
|
|
RGPS-92222GCP-NP-P-E - 22GE PoE + 2G Combo PoE + 2G SFP Managed Ethernet Switch, IEEE 802.3af/at, AC input
by ORing Industrial Networking
|
|
|
|
RGPS-92222GCP-NP-P-E_SUMMARY.html
22GE PoE + 2G Combo PoE + 2G SFP Managed Ethernet Switch, IEEE 802.3af/at, AC input
|
|
|
RGPS-92222GCP-NP-P-E - RGPS-92222GCP-NP-P-E - 22GE PoE + 2G Combo PoE + 2G SFP Managed Ethernet Switch, IEEE 802.3af/at, AC input
RGPS-92222GCP-NP-P-E.html
Physical ports |
|---|
| Gigabit Combo ports with 10/100/1000Base-T(X) RJ45 and 100/1000Base-X SFP ports | 2 | | 10/100/1000/2500Base-T(X) ports with P.S.E. in RJ45 | 22 | | 100/1000Base-X with SFP port | 2 | | RS-232 Serial Console port | RS-232 in DB-9 connector with console cable. 115200bps, 8, N, 1 |
LED Indicators |
|---|
| Power Indicator (Power) | Green : Power indicator | | Ring Master Indicator (R.M.) | Green : Indicates that the system is operating in O-Ring Master | | O-Ring Indicator (Ring) | Green : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken. | | Fault Indicator (Fault) | Amber : Indicate unexpected event occurred | | 10/100/1000Base-T(X) RJ45 port indicator | Dual color LED for Speed/Link/Act
Green : 1000Mbps Link/Act
Amber : 10/100Mbps Link/Act | | 100/1000Base-X SFP Port Indicator | Green for port Link/Act. | | PoE Indicator | Green : PoE enabled LED x 24 |
Power |
|---|
| Power consumption (Typ.) | 37 Watts (P.D. not included) | | PoE Output Power | 30W/pre port | | Power Input | One 100 ~ 240VAC with AC socket and dual 50 ~ 57VDC with terminal block | | Total PoE Output Power | terminal block Power supply 1000 Watts power supply included (720W power budget) | | Overload current protection | Present |
Technology |
|---|
| Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) | | MAC Table | 8K | | Priority Queues | 8 | | Processing | Store-and-Forward | | Switch Properties | Switching latency: 7 us Switching bandwidth: 52Gbps
Max. Number of Available VLANs: 4095
VLAN ID Range : VID 1 to 4094
IGMP multicast groups: 256 for each VLAN
Port rate limiting: User Define | | Jumbo frame | Up to 9.6K Bytes | | Security Features | Device Binding security feature Enable/disable ports, MAC based port security
Port based network access control (802.1x)
Single 802.1x and Multiple 802.1x
MAC-based authentication
QoS assignment
Guest VLAN
MAC address limit
TACACS+
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Web and CLI authentication and authorization
Authorization (15 levels)
IP source guard
| | Software Features | IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static) Multiple Registration Protocol (MRP)
MSTP (RSTP/STP compatible)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP v2/v3 Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client
DHCP Relay
Modbus TCP
DNS client proxy
SMTP Client
NTP server | | Network Redundancy | O-Ring Open-Ring
O-Chain
MRP
MSTP (RSTP/STP compatible) |
|
l');
?>
|
