I-2533CS-FD_DESCRIPTION.html
The I-2533CS-FD is a local CAN/CAN FD (CAN with Flexible Data-Rate) bridge used to establish a connection between two CAN bus system via single mode fiber optic transmission medium. In order to solve the problem between CAN/CAN FD and fiber transmission medium, the I-2533CS-FD is specially designed for converting the electrical CAN/CAN FD bus signal to fiber optic cables. Besides, I-2533CS-FD has three more important features. First, the transmission distance limitation of the CAN bus system will not affected due to the different CAN/CAN FD baud rate. It means that the total CAN/CAN FD bus working distance can be extended. Second, the bus error on one CAN/CAN FD network will not affect the operation of another CAN/CAN FD network. Finally, the two CAN/CAN FD network can communication with each other by using different CAN/CAN FD baud rate for highly flexibility.
I-2533CS-FD.html
LED Indicators |
Status |
1 x Power, 3 x CAN status, 2 x Fiber status |
Fiber |
Fiber Cable |
8.3/125, 8.7/125, 9/125 or 10/125 µm |
Wavelength |
1310 nm |
TX Output |
-15 dBm Min. , -8 dBm Max. |
RX Sensitivity |
-34 dBm Max. |
RX Overload |
-5 dBm Max. |
Budget |
19 dBm |
Propagation Delay |
190 us (*Note1) |
Distance Between Stations |
30 km (9/125 µm recommended) |
USB |
Specification |
USB 2.0 High Speed (480Mbps) |
Connector |
USB Type B, Mini-B |
Driver |
Built-in Windows 7/8.1/10 |
Power |
Input Range |
+10 VDC ~ +30 VDC |
Consumption |
4 W Max. |
CAN |
Ports |
1 |
Baud Rate |
CAN bit rates: 10 k ~ 1 M bps, CAN FD bit rates for data field: 100 k ~ 10M bps
(*Note2) |
Terminal Resistor |
Switch for 120Ω terminal resistor |
Specification |
ISO 11898-2, CAN 2.0 A/B and FD |
Filter |
Yes |
Power |
Input Range |
+10 VDC ~ +30 VDC |
Consumption |
3 W |
Mechanical |
Casing |
Plastic |
Dimensions (mm) |
33 x 127 x 101 (W x L x H) |
Installation |
DIN-Rail |
Environmental |
Operating Temperature |
-25 ~ +75C |
Storage Temperature |
-30 ~ +80C |
Humidity |
10 ~ 90% RH, Non-condensing |
|