|
|
WISE-7504M - Configurable I/O Controller with 4 Analog Inputs, 4 Analog Outputs, 4 Digital Inputs and 2 Ethernet ports. Supports by ICP DAS
|
|
|
WISE-7504M_SUMMARY.html
- Runs on browsers, no extra software tool is required.
- No more programming, Web pages provided for control logic editing.
- IF-THEN-ELSE logic rules execution ability.
- Built-in I/O (AI: 4 Channels; AO: 4 Channels; DI: 4 Channels)
- Support I/O Moniitoring/Control, Counter, Timer, Schedule, Email sending and CGI Command sending operations.
- Modbus TCP Protocol for SCADA System Integration.
- IEEE 802.3af-compliant Power over Ethernet (PoE).
- 2-port Ethernet Switch for Daisy-Chain Topology.
- MQTT Protocol for IT & IoT (Internet of Things) System Integration.
|
|
|
WISE-7504M_DESCRIPTION.html
WISE-7504M is a multi-function module with 4-channel analog inputs, 4-channel analog outputs and 4-channel digital inputs module. WISE-7540M provides multiple programmable analog inputs, and analog outputs. Each of its analog inputs can configure a proper range of 240 Vrms high voltage protection. WISE-7504M follows IEEE 802.3af-compliant Power over Ethernet (PoE) specification, allowing it to receive power from PoE enabled network by Ethernet pairs. In additional to this, WISE-7504M is equipped with two-port ethernet switch to implement daisy-chain topology; reducing the cost and allowing easy cabling.
By integrating with IF-THEN-ELSE rule engine, WISE-7504M provides more powerful functions such as I/O Moniitoring/Control, Counter, Timer, Schedule, E-mail sending & CGI Command sending for use in various industrial applications. WISE-7504M also supports Modbus TCP and MQTT protocol to make seamless integration with SCADA, IT and IoT (Internet of Things) system.
WISE-7504M.html
Channels
|
4 (Differential)
|
Type
|
±500 mV, ±1 V, ±5 V, ±10 V,+0 mA to +20 mA, ±20 mA, 4 to 20 mA (Jumper Selectable)
|
Resolution
|
16-bit
|
Sampling Rate
|
10 Samples/Second (Total)
|
Accuracy
|
±0.1 %
|
Zero Drift
|
±20 ±V/C
|
Span Drift
|
±25 ppm/C
|
Overvoltage Protection
|
240 Vrms
|
Overcurrent Protection
|
50 mA Max. at 110 VDC/VAC Max.
|
Common Voltage Protection
|
±200 VDC
|
Overcurrent Protection
|
Yes, 50 mA at 110 VDC
|
Virtual Channel to Channel Isolation
|
Yes, 400 VDC
|
Open Wire Detection for 4 ~ 20 mA
|
Yes
|
Input Impedance
|
Voltage
|
2 MO
|
|
Current
|
125 O
|
Common Mode Rejection
|
86 dB Min.
|
Normal Mode Rejection
|
100 dB
|
Channels
|
4
|
Type
|
+0 VDC to +5 VDC, ±5 VDC, +0 VDC to +10 VDC,±10 VDC,+0 mA to +20 mA, +4 mA to +20 mA (Jumper
Selectable)
|
Resolution
|
12-bit
|
Accuracy
|
±0.1% of FSR
|
Voltage Output Capability
|
20 mA @ 10 V
|
Current Load Resistance
|
400 O
|
Open Wire Detection
|
Yes, for 4 to 20 mA only
|
|
l');
?>
|