WISE-2241M - IIoT Edge Controller for I/O monitoring and control

ICP DAS WISE-2241M - IIoT Edge Controller for I/O monitoring and control, scheduling operations and data logging. Works with Mo
by ICP DAS

WISE-2241M_SUMMARY.html

Runs on browsers, no extra software tool is required
No more programming, Web pages provided for control logic editing
IF-THEN-ELSE logic rules execution ability
Support XV-board
Support DCON or Modbus RTU Slave modules (Up to 32, COM3 and COM4 can connect to Max. 16 modules individually.)
Support Modbus TCP Slave modules (Up to 16)
Timer and Schedule functions supported
Data logger and data files send back function supported
Active I/O sending function for real-time data transfer
CGI Command sending and receiving function supported for IP Camera and Network device
Support Modbus TCP/RTU, SNMP, FTP and MQTT protocols
Support LINE, Messenger and Email real-time message sending
Support Connection with IoT Cloud Platform (Microsoft Azure and IBM Bluemix)
Supports IoTstar Cloud Management Software

Description
Specification
Datasheet

WISE-2241M_DESCRIPTION.html WISE-2241M developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With the built-in IF-THEN-ELSE logic engine, WISE can execute the automation logic in a stable and efficient way, and it also provides mathematic operation, Schedule and Email alarm message sending functions.

WISE-2241M.html

System
CPU	32-bit ARM CPU
microSD Expansion	Built-in one 4 GB microSD card (support up to 32 GB microSDHC card)
Communication
Ethernet	RJ-45 x 2, 10/100/1000 Base-TX (Auto-negotiating, Auto MDI/MDI-X)
COM 2	RS-232 (TxD, RxD, GND), non-isolated, Speed: 115200 bps max.
COM 3 / COM 4	RS-485 (Data+, Data-), Speed: 115200 bps max. COM 4 provides 2500 VDCisolation
LED Indicators
Indicators	Run LED (Green), 4G LED (Orange), Power LED (Red), L1 (Green), L2 (Orange), L3 (Red)
I/O Module Support
Local I/O Module	Yes, one XV-board
Remote I/O Module	COM3 can connect to Max. 16 DCON or Modbus RTU Slave modules COM4 can connect to Max. 16 DCON or Modbus RTU Slave modules LAN interface can connect to Max. 16 Modbus TCP Slave modules
Power Requirements
Input Range	12 to 48 VDC
Power Consumption	4.8 W
Mechanical
Dimensions/Installation (W x L x H)	33 mm × 160 mm × 129mm / DIN-Rail Installation
Environmental
Temperature/Humidity	Operating Temperature: -25 C to +75 C Storage Temperature: -40 C to +80 C 10 to 90% RH, Non-condensing

Function		Description
User-friendly and intuitive web site interface	Browser Interface	Runs on browsers, no extra software tool is required. No more programming, Web pages provided for control logic editing and system parameters setting.
Various options for easy I/O module integration	Local side I/O Interface	Support XV-board. (XV107, XV107A, XV110, XV111, XV111A, XV116, XV306, XV307, XV308, XV310)
	Remote side I/O Interface (RS-485)	Support ICP DAS I-7000/M-7000/tM/DL/LC/SC/IR series module. Support Modbus RTU Slave module.
	Remote side I/O Interface (Ethernet)	Support ICP DAS WISE-7100/(P)ET-7000/WF-2000 series module. Support Modbus TCP Slave module.
Intelligent Logic operation and data logger ability at ?eld sites	IF-THEN-ELSE Logic operation	Provide IF-THEN-ELSE logic rule editing, and the ability for IF-THEN-ELSE logic rules execution.
	I/O channel monitoring and control	Offers various options for I/O channel settings; for example: deadband setting for AI signals, linear scale setting, temperature degree in Celsius or Fahrenheit setting, power on value setting for DO channel, pulse output setting and DI counter setting, etc.
	Timer	Perform the timing function. The status of Timer can be included in IF condition statements to trigger the THEN/ELSE actions.
	Schedule	Perform the prescheduled routine tasks. The status of Schedule can be included in IF condition statements to trigger the THEN/ELSE actions. Calendar and Weekly repeat schedule setting UI are provided.
	Realtime message sending function	Support LINE, Messenger and Email real-time message sending.
	CGI Command	Perform CGI command sending and receiving functions. The content of CGI command receiving can be used in IF condition statements to trigger the THEN/ELSE actions.
	Data Logger	Perform Data Logger function to real-time record the I/O channel data of the controller by Period or Event Trigger operation.
	Internal Register	Work as a variable to hold the temporary value, and provide the basic mathematical operation.
Various protocols for seamless integration with SCADA/MIS/MES/IT/Network Management systems	Real-Time I/O channel data	Support Modbus TCP/RTU protocol for SCADA system. Support SNMP and MQTT protocols for the integration with MIS/MES/IT/Network Management systems. CGI Command sending and receiving function supported for the integration with IP Camera and Network devices. Active I/O sending mechanism supported.
	Historical I/O channel data ?les	FTP Server/Client ability for the maintenance of data logger ?les and the data logger ?les automatically send back operation. Provide data recovery mechanism so that when experiences network disconnection, the data log ?les will be kept in WISE, and be recovered after the network is resumed. Provide alarm noti?cation mechanism so that when microSD card is damaged, the data log ?le will be stored in WISE to ensure zero data loss of the data logger.
	Communication Service	DDNS (Dynamic DNS) service supported.
	IoT Gateway Capability	Connection with Microsoft Azure and IBM Bluemix IoT Cloud platform. Connection with ICP DAS IoTstar IoT Cloud Management Software.