|
|
WISE-7153 - 16-channel Dry Contact Digital Input PoE Module (RoHS) by ICP DAS
|
|
|
WISE-7153_SUMMARY.html
- Built-in Web Server for IF-THEN-ELSE rule setting
- Built-in IF-THEN-ELSE rule enigne for logic operation
- No more programming. Just click and get done!
- Support IO, Counter, Timer, Email operations
- Modbus TCP Protocol for SCADA Software Seamless Integration
- IEEE 802.3af-compliant Power over Ethernet (PoE)
- 10/100 Base-TX Ethernet
- 2-way Isolation/ESD Protection
- DI Type: 16 Dry Contact
|
|
|
WISE-7153_DESCRIPTION.html
WISE-7153 is equipped with 16-channel dry contact digital inputs; each digital input channel supports counter input. WISE-7153 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency. With this design, it eliminates space, reduces the use of cables and eliminates the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7153 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.
WISE-7153.html
Input Channels
|
16
|
Input Type
|
Dry Contact (Source)
|
On Voltage Level
|
Close to GND
|
Off Voltage Level
|
Open
|
Counters
|
Max. Count
|
65535 (16 bits)
|
|
Max. Input Frequency
|
50 Hz
|
|
Min. Pulse Width
|
10 ms
|
CPU
|
16-bit CPU
|
SRAM
|
512 KB
|
Flash Memory
|
512 KB
|
EEPROM
|
16 KB
|
Watchdog
|
yes
|
PoE Ethernet Port
|
10 / 100 Base-TX and Automatic MDI/MDI-X
|
ESD (IEC 61000-4-2)
|
+/-4 kV Contact for each terminal and ±8 kV Air for random point
|
EFT (IEC 61000-4-4)
|
+/-2 kV for Power Line
|
PoE
|
PoE On
|
L1
|
System Running
|
L2
|
Ethernet Link/Act
|
L3
|
Ethernet 10/100M Speed
|
Reserve Polarity Protection
|
Yes
|
Powered from terminal block
|
Yes, 12 ~ 48 VDC
|
Powered from PoE
|
Yes, IEEE 802.3af, Class1
|
Consumption
|
3.0 W
|
Dimensions (W x H x D)
|
72 mm x 123 mm x 35 mm
|
Installation
|
DIN-Rail or Wall mounting
|
Operating Temperature
|
-25 C ~ +75 C
|
Storage Temperature
|
-30 C ~ +80 C
|
Humidity
|
10 ~ 90% RH, non-condensing
|
Software Specifications
Rule Configuration Website
|
Access Web server on WISE controllers to edit and upload logic rules through web browser.
|
36 IF-THEN-ELSE Logic Rules
|
3 IF conditions with AND or OR operators 3 THEN actions and 3 ELSE actions
|
48 Internal Registers
|
Hold temporary variables and read/write data via Modbus TCP address.
|
12 Timers
|
Delay / Timing functions.
|
12 Emails
|
Send Email messages to pre-set Email receivers.
|
12 CGI Commands
|
Send pre-set CGI commands.
|
12 Recipes
|
Set up THEN/ELSE action groups.
|
8 P2P remote modules
|
Set up the connection information for the remote WISE modules.
|
Modbus TCP Protocol
|
Real time control and monitoring I/O channels and system status of controllers via SCADA software.
|
DI Channel
|
ON, OFF, ON to OFF, OFF to ON, Change
|
Internal Register
|
=, >, <, =, = (value)
|
DI Counter
|
=, >, <, =, = (value), Change
|
Timer
|
Timeout, Not Timeout
|
P2P
|
DI, AI, DI counter, DO counter, IR
|
Rule Status
|
Enable, Disable
|
Internal Register
|
Change the value
|
DI Counter
|
Reset
|
Timer
|
Start, Reset
|
Email
|
Send
|
CGI Commands
|
Send
|
Recipe
|
Execute
|
P2P
|
DO(On/Off), AO, IR
|
Rule Status
|
Enable, Disable
|
|
l');
?>
|