|
|
|
WISE-7105 - 8-channel Thermistor Input and 4-channel Isolated Digital Output PoE Module (RoHS)
by ICP DAS
|
|
|
|
8-channel Thermistor Input (Analog Input) and 4-channel Isolated Digital Output PoE Modbus TCP Protocol Module. Built-in Web Server, with operating temperature range of -25°C ~ +75°C (-13° ~ +167°F)
|
|
|
WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.
WISE-7105 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7105 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.
This multi-function module WISE-7105 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 16-bit, 8-channel Thermistor inputs and 4-channel digital outputs. Each analog channel is allowed to configure an individual range.
- Built-in Web Server for IF-THEN-ELSE rule setting
- Built-in IF-THEN-ELSE rule enigne for logic operation
- No more programming. Just click and get done!
- Support IO, Counter, Timer, Email operations
- Modbus/TCP Protocol for SCADA Software Seamless Integration
- IEEE 802.3af-compliant Power over Ethernet (PoE)
- 10/100 Base-TX Ethernet
- Support Thermistor Input
- Individual Channel Configuration
- 4-channel Digital Outputs
- 2-way Isolation/ESD Protection
| Analog Input |
| Input Channels |
8 (Differential) |
| Input Type |
Precon ST-A3, Fenwell U, YSI L100, YSI L300, YSI L1000, YSI B2252, YSI B3000, YSI B5000,YSI B6000, YSI B10000, YSI H10000, YSI H3000 |
| Resolution |
16-bit |
| Sample Rate |
10 Sample/Sec. (Total) |
| Accuracy |
+/-0.1% or bette |
| Zero Drift |
+/-20 μV/°C |
| Span Drift |
+/-25 ppm/°C |
| Overvoltage Protection |
110 VDC/VAC |
| Common Mode Rejection |
86 dB min. |
| Normal Mode Rejection |
100 dB |
| Open Wire Detection |
Yes |
| Individual Channel Configuration |
Yes |
| Digital Output |
| Output Channels |
4 |
| Output Type |
Isolated Open Collector (Sink) |
| Max. Load Current |
700 mA/Channel |
| Load Voltage |
5 VDC ~ 50 VDC |
| Overvoltage Protection |
60 VDC |
| Overload Protection |
1.4 A |
| Short-circut Protection |
Yes |
| System |
| CPU |
16-bit CPU |
| SRAM |
512 KB |
| Flash Memory |
512 KB |
| EEPROM |
16 KB |
| Watchdog |
Yes, Programmable over DCON |
| Communication |
| PoE |
10/100 Base-TX and automatic MDI/MDI-X |
| 2-way Isolation |
| Ethernet |
2500 VDC |
| LED Indicators |
| PoE |
PoE On |
| L1 |
System Running |
| L2 |
Ethernet Link/Act |
| L3 |
Ethernet 10/100 M Speed |
| EMS Protection |
| ESD (IEC 61000-4-2) |
±4 kV Contact for each terminal and ±8 kV Air for random poin |
| EFT (IEC 61000-4-4) |
±4 kV for Power Line |
| Power Requirements |
| Reserve Polarity Protection |
Yes |
| Powered from Terminal Block |
Yes, 12 ~ 48 VDC |
| Powered from PoE |
Yes, IEEE 802.3af, Class1 |
| Consumption |
3.0 W |
| Mechanical |
| Dimensions (W x H x D) |
72 mm x 123 mm x 35 mm |
| Installation |
DIN-Rail or Wall mounting |
| Environment |
| Operating Temperature |
-25 °C ~ +75 °C (-13°F ~ +167°F) |
| Storage Temperature |
-30 °C ~ +80 °C (-22°F ~ 176°F) |
| Humidity |
5 ~ 90% RH, non-condensing |
|
|
|
