|
|
WISE-7102 - 3 Channel Analog Input (Current inputs), 6 Channel Digital Inputs and 3 Channel Power Relay Output by ICP DAS
|
|
|
3-Channel Analog Input (Current Input), 6-Channel Digital Inputs (16-bit Counters), and 3-Channel Power Relay Output PoE Module. Built-in Web Server, with operating temperature range of -25°C ~ +75°C (-13° ~ +167°F)
|
|
|
WISE-7102 (Web Inside, Smart Engine) is a device developed by ICP DAS USA that functions as a control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers with just a few clicks; no programming is required. With its powerful and easy-to-use features, it minimizes the learning curve, shorten time to market, and dramatically reduce effort and cost spent on system development.
The WISE-7102 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled networks by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. For cases under a non-PoE environment, WISE-7102 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.
This multi-function module WISE-7102 supports Modbus TCP protocol for seamless integration with SCADA software available. It features 3-channel analog inputs, 6-channel digital inputs and 3-channel Power Relay outputs. Each analog input channel provides 240 Vrms high over voltage protection.
- Built-in Web Server for IF-THEN-ELSE rule setting
- Built-in IF-THEN-ELSE rule engine for logic operation
- No more programming. Just click and get it done!
- Support IO, Counter, Timer, email operations
- Modbus/TCP Protocol for SCADA Software Semaless Integration
- IEEE 802.3af-compliant Power over Ethernet (PoE)
- 10/100 Base-TX Ethernet
- Analog Input: 3-channel (mV, V, mA)
- Digital Output: 3-channel (Power Relay, Form A)
- Digital Input: 6-channel (Wet)
Analog Input |
Input Channels |
3 (Differential) |
Input Type (Jumper Selectable) |
+/-150 mV, +/-500 mV, +/-1V, +/-5 V, +/-10 V |
+0 mA ~ +20 mA, +/-20 mA, 4 ~ 20 mA |
Resolution |
16-bit |
Sample Rate |
10 Sample/Sec. (Total) |
Accuracy |
+/-0.1% |
Zero Drift |
+/-20 μV/°C |
Span Drift |
+/-25 ppm/°C |
Overvoltage Protection |
240 Vrms |
Overcurrent Protection |
50 mA max. at 110 VDC/VAC max |
Input Impedence |
Voltage |
2 MΩ |
Current |
125 Ω |
Common Mode Rejection |
86 dB min. |
Normal Mode Rejection |
100 dB |
Individual Channel Configuration |
Yes |
Open Wire Detection |
Yes, for 4 ~ 20 mA only |
Digital Input |
Input Channels |
6 |
Contact |
Wet Contact |
Sink/Source (NPN/PNP) |
Sink/Source |
On Voltage Level |
+10 VDC ~ +50 VDC |
Off Voltage Level |
+4 VDC Max |
Input Impedence |
10 KΩ, 0.5W |
Counters |
Channels |
6 |
Max. Counts |
16-bit (65535) |
Max. Input Frequency |
50 Hmz |
Min. Pulse Width |
10 ms |
Overvoltage Protection |
+50 VDC |
Power Relay |
Channels |
3 |
Type |
Power Relay, Form A (SPST N.O.) |
Operating Voltage Range |
250 VAC/30 VDC |
Max Load Current |
5.0A/channel at 25°C |
Operating Time |
6 ms (Typical) |
Release Time |
3 ms (Typical) |
Electrical Life (Resistive load) |
VDE: |
5 A @ 250 VAC 30,000 ops (10 ops/minute) at 75°C. |
5 A @ 30 VDC 70,000 ops (10 ops/minute) at 75°C. |
UL: |
5 A @ 250 VAC/30 VDC 6,000 ops |
3 A @ 250 VAC/30 VDC 100,000 ops. |
Mechanical Life |
20,000,000 ops. at no load (300 ops./minute). |
Intra-module Isolation, Field-to-Logic |
3750 VDC |
System |
CPU |
16-bit CPU |
SRAM |
512 KB |
Flash Memory |
512 KB |
EEPROM |
16 KB |
Watchdog |
Yes, Programmable over DCON |
Communication |
PoE Ethernet Port |
10/100 Base-TX and automatic MDI/MDI-X |
2-Way Isolation |
I/O |
2500 VDC |
EMS Protection |
ESD (IEC 61000-4-2) |
±4 kV Contact for each terminal and ±8 kV Air for random poin |
EFT (IEC 61000-4-4) |
±4 kV for Power Line |
LED Indicators |
PoE |
PoE On |
L1 |
System Running |
L2 |
Ethernet Link/Act |
L3 |
Ethernet 10/100M Speed |
Power Requirements |
Reserve Polarity Protection |
Yes |
Powered from Terminal Block |
Yes, 12 ~ 48 VDC |
Powered from PoE |
Yes, IEEE 802.3af, Class1 |
Consumption |
3.0 W |
Mechanical |
Dimensions (W x H x D) |
72 mm x 123 mm x 35 mm |
Installation |
DIN-Rail or Wall mounting |
Environment |
Operating Temperature |
-25 °C ~ +75 °C (-13°F ~ +167°F) |
Storage Temperature |
-30 °C ~ +80 °C (-22°F ~ 176°F) |
Humidity |
10 ~ 90% RH, non-condensing |
|
|
|