AWK-3252A-UN-T - 802.11a-b-g-n-ac access point, UN band, -40 to 75°C operating temperature
by MOXA

The AWK-3252A Series 3-in-1 industrial wireless AP-bridge-client is designed to meet the growing need for faster data transmission speeds through IEEE 802.11ac technology for aggregated data rates of up to 1.267 Gbps. The AWK-3252A is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the reliability of the power supply, and the AWK-3252A can be powered via PoE to facilitate flexible deployment. The AWK-3252A can operate concurrently on both the 2.4 and 5 GHz bands and is backwards-compatible with existing 802.11a-b-g-n deployments to future-proof your wireless investments.

WLAN Interface

• WLAN Standards

  • 2.4 GHz: 802.11b-g-n with 256 QAM support
    5 GHz: 802.11a-n-ac Wave 2 with 256 QAM support
    

• Frequency Band for UN (20 MHz operating channels)

  • 2.412 to 2.484 GHz (14 channels)
    5.180 to 5.240 GHz (4 channels)
    5.745 to 5.825 GHz (5 channels)
    Available channels change depending on the selected country or region code.
    5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
    5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.

• Wireless Security

  • WEP encryption (64-bit and 128-bit)
    WPA-WPA2-WPA3-Enterprise (IEEE 802.1X-RADIUS, TKIP, AES)
    WPA-WPA2-WPA3-Personal

• Transmission Rate

  • 2.4 GHz:
    802.11b: 1 to 11 Mbps
    802.11g: 6 to 54 Mbps
    802.11n: 6.5 to 400 Mbps
    
    5 GHz:
    802.11a: 6 to 54 Mbps
    802.11n: 6.5 to 300 Mbps
    802.11ac: 6.5 to 867 Mbps

• Transmitter Power for 802.11a (Dual Chain)

  • 25±1.5 dBm @ 6 Mbps
    23±1.5 dBm @ 54 Mbps

• Transmitter Power for 802.11n (5 GHz, Dual Chain)

  • 25±1.5 dBm @ MCS0 20 MHz
    22±1.5 dBm @ MCS7 20 MHz
    24±1.5 dBm @ MCS0 40 MHz
    22±1.5 dBm @ MCS7 40 MHz

• Transmitter Power for 802.11ac (Dual Chain)

  • 25±1.5 dBm @ MCS0 20 MHz
    22±1.5 dBm @ MCS8 20 MHz
    24±1.5 dBm @ MCS0 40 MHz
    21±1.5 dBm @ MCS9 40 MHz
    23±1.5 dBm @ MCS0 80 MHz
    20±1.5 dBm @ MCS9 80 MHz

• Transmitter Power for 802.11b (Dual Chain)

  • 29±1.5 dBm @ 1 Mbps
    29±1.5 dBm @ 11 Mbps

• Transmitter Power for 802.11g (Dual Chain)

  • 29±1.5 dBm @ 6 Mbps
    26±1.5 dBm @ 54 Mbps

• Transmitter Power for 802.11n (2.4 GHz, Dual Chain)

  • 28±1.5 dBm @ MCS0 20 MHz
    25±1.5 dBm @ MCS7 20 MHz
    28±1.5 dBm @ MCS0 40 MHz
    25±1.5 dBm @ MCS7 40 MHz

• Receiver Sensitivity for 802.11a (measured at 5.680 GHz)

  • Typ. -88 @ 6 Mbps
    Typ. -72 @ 54 Mbps

• Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz)

  • Typ. -88 dBm @ MCS0 20 MHz
    Typ. -68 dBm @ MCS7 20 MHz
    Typ. -84 dBm @ MCS0 40 MHz
    Typ. -66 dBm @ MCS7 40 MHz

• Receiver Sensitivity for 802.11ac

  • Typ. -88 dBm @ MCS0 20 MHz
    Typ. -65 dBm @ MCS8 20 MHz
    Typ. -85 dBm @ MCS0 40 MHz
    Typ. -60 dBm @ MCS9 40 MHz
    Typ. -81 dBm @ MCS0 80 MHz
    Typ. -55 dBm @ MCS9 80 MHz

• Receiver Sensitivity for 802.11b (measured at 2.437 GHz)

  • Typ. -96 dBm @ 1 Mbps
    Typ. -88 dBm @ 11 Mbps

• Receiver Sensitivity for 802.11g (measured at 2.437 GHz)

  • Typ. -90 dBm @ 6 Mbps
    Typ. -74 dBm @ 54 Mbps

• Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz)

  • Typ. -90 dBm @ MCS0 20 MHz
    Typ. -70 dBm @ MCS7 20 MHz
    Typ. -87 dBm @ MCS0 40 MHz
    Typ. -69 dBm @ MCS7 40 MHz

• WLAN Operation Mode

  • Access point, Client, Client-Router, Master, Slave, Sniffer

• Antenna

  • External, 2-2 dBi, Omni-directional

• Antenna Connectors

  • 2 RP-SMA female

Ethernet Interface

• Standards

  • IEEE 802.3 for 10BaseT
    IEEE 802.3u for 100BaseT(X)
    IEEE 802.3ab for 1000BaseT(X)
    IEEE 802.3af for PoE
    IEEE 802.3at for PoE
    IEEE 802.1Q for VLAN Tagging
    IEEE 802.1X for authentication

• 10-100-1000BaseT(X) Ports (RJ45 connector)

  • 1

• PoE Ports (10-100-1000BaseT(X), RJ45 connector)

  • 1

Ethernet Software Features

• Management

  • DHCP Client, DNS, HTTP, IPv4, LLDP, SMTP, SNMPv1-v2c-v3, Syslog, TCP-IP, Telnet, UDP, VLAN, MXconfig

• Routing

  • Port forwarding, Static Route, NAT

• Security

  • HTTPS-SSL, RADIUS, SSH

• Time Management

  • SNTP Client

Firewall

• Filter

  • ICMP, MAC address, IP protocol, Port-based

Serial Interface

• Console Port

  • RS-232, 8-pin RJ45

USB Interface

• Storage Port

  • USB Type A

LED Interface

• LED Indicators

  • PWR1, PWR2, PoE, SYS, 2.4G, 5G, LAN1, LAN2

Input-Output Interface

• Digital Inputs

  • 2
    Max. input current: 8 mA
    +13 to +30 V for state 1
    +3 to -30 V for state 0

• Alarm Contact Channels

  • Relay output with current carrying capacity of 1 A @ 24 VDC

• Buttons

  • Reset button

Physical Characteristics

• Housing

  • Metal

• IP Rating

  • IP30

• Dimensions

  • 45 x 130 x 100 mm (1.77 x 5.12 x 3.94 in)

• Weight

  • 700 g (1.5 lb)

• Installation

  • DIN-rail mounting, Wall mounting (with optional kit)

Power Parameters

• Input Current

  • 12-48 VDC, 2.2-0.5 A

• Input Voltage

  • 12 to 48 VDC, Redundant dual inputs, 48 VDC Power-over-Ethernet

• Power Connector

  • 1 removable 10-contact terminal block(s)

• Power Consumption

  • 28.4 W (max.)

Environmental Limits

• Operating Temperature

  • -40 to 75C (-40 to 167F)

• Storage Temperature (package included)

  • -40 to 85C (-40 to 185F)

• Ambient Relative Humidity

  • 5 to 95% (non-condensing)

Standards and Certifications

• EMC

  • EN 61000-6-2--6-4, EN 55032-35

• EMI

  • CISPR 32, FCC Part 15B Class A

• EMS

  • IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V-m
    IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
    IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
    IEC 61000-4-6 CS: 10 V-m
    IEC 61000-4-8 PFMF: 30 A-m

• Safety

  • IEC 60950-1, IEC 62368-1, UL 62368-1

• Hazardous Locations

  • ATEX, Class I Division 2, IECEx

• Road Vehicles

  • E mark E1

• Vibration

  • IEC 60068-2-6

• Radio

  • EN 300 328, EN 301 489-1-17, EN 301 893, ANATEL, FCC, MIC, NCC, RCM, SRRC, WPC, KC, IC

MTBF

• Time

  • 653,801 hrs

• Standards

  • Telcordia SR332

Warranty

• Warranty Period

  • 5 years

• Details

  • See www.moxa.com-warranty

AWK-3252A-UN-T.pdf

949 K