|
|
|
SN4112/JO/EUI - SmartNode Dual FXO VoIP Gateway, 1x10/100baseT, H.323 and SIP, External UI Power.
by PATTON
|
|
|
|
- Up to 8 FXS and/or FXO ports—Compact, reliable stand-alone VoIP gateway with different port options. Supports simultaneous voice or fax calls on all ports. (note: Patton does not carry an 8-FXO unit at the present time)
- Advanced Local Call Switching—Virtual interfaces and routing tables provide industry leading flexibility in call handling programming. Local call switching, soft fallback to alternative routes. Simultaneously connects to multiple SIP services/IP PBXs.
- Complete SIP and T.38 support—Supports the complete range of industry standard VoIP: SIP, H.323, T.38 fax, fax and modem handling, DTMF relay. Codecs G.729, G.723, etc.
- Easy Management & Provisioning—Web-based management, SNMP, command line interface. Automated mass provisioning for efficient large-scale deployments.
- Outstanding Interoperability—Proven integration for voice and T.38 fax with 3CX®, Asterisk™, PingTel™ and other leading IP PBX systems and soft switch vendors.
- Supported by SmartNode™ Redirection Service: A free service enabling zero-touch mass deployments for Service Providers and Distributors with auto-provisioning servers
|
|
|
The Patton Model SN4112-JO-EUI supports up to eight transparent phone calls and leverages VoIP for carrier and corporate access. Connecting to any analog phone, fax, or PBX, the SN4110 is an effective and flexible solution for toll-bypass, remote/branch office voice connectivity, and enhanced carrier services.
The SN4110 Series is the perfect choice for phone-to-IP connectivity supporting up to 8 FXS ports or a combination of 4 FXS and 2 or 4 FXO ports. With its FXS analog ports, the SN4112S connects to any legacy telephone or PBX and provides dial-tone, ringing, and caller-ID. When equipped with FXO ports, the local PSTN can be accessed enabling local calling and enhanced toll-bypass applications while using a single connected telephone. Flexible call integration allows per-port telephone numbers, programmable call progress tones, and distinctive ringing. With Telephony-over-IP (ToIP) call switching, calls can automatically select the least-cost-route while providing flexible numbering plans and end-to-end feature transparency. PPPoE, DHCP, and VLAN offers universal IP connectivity and optional IPsec VPN with AES/3DES guarantees secure voice over the public network.
Patton’s SmartNode SN4110 Series delivers the legacy phone interfaces, service transparency, and flexible PSTN integration required for true converged packet voice.
| Call Capacity |
Up to 4 simultaneous G.722 or G.711 or T.38 fax calls |
| Voice Signaling |
- SIPv2 & SIPv2 over TCP
- SIPv2 TLS**
- SIPv2 over IPv6
- SIP call transfer, redirect
- Overlap or en-bloc dialing
- DTMF in-band, out-of-band
- Configurable tones Call Routing & Services
- Regular expression number matching
- Regular expression number manipulation
- Least Cost Routing
- Number blocking
- Short-Dialing
- Digit collection
- Distribution-Groups and Hunt-Groups
|
| FXS Connectivity |
- FXS ports, RJ-11/12
- 2-wire Loopstar
- Programmable AC impedance, feeding, ring and onhook voltage
- Caller-ID FSK and ITU V.23/Bell 202 generation
- 5 REN load on FXS port
|
| FXO Connectivity |
- 2-wire Loopstart – RJ11/12
- Programmable impedance
- Ring detection, tone detection
- Caller ID detection (FXS, DTMF)
- Disconnect supervision
|
| Voice Processing |
- G.722, G.711m/A-law
- 729ab (8 kbps)
- G.726 (16, 24, 32 Kbps)
- G.168-2004 echo cancellation (64 ms)
- Up to 4 simultaneous low bandwidth, high definition voice or T.38 fax calls
- Silence suppression and comfort noise
- Adaptive and configurable dejitter buffer
- Configurable RTP packet length
|
| Quality of Service |
IEEE 802.1p, IEEE 802.1Q, 4096 VLANs (tag insertion/deletion), TOS, DiffServ labeling |
Connectivity
|
- One 10/100 Base-T Ethernet port (depending on Model - optional PoE powered IEEE 802.3af Class 2)
- Auto-MDIX
- DHCP Client (IPv4 & IPv6)
- PPPoE Client (multi-session)
- IP Multi-Netting, VLAN, Secondary IP
- IPv4 & IPv6 Dual Stack
- ICMP
- Dynamic and static NAT and NAPT
- Access Control List (ACL)
- DNS, DynDNS
- DHCP Server
- SNTP Client
|
| Management |
- Patton Cloud managed
- Web/HTTPS, CLI with Telnet and SSH access
- Web Wizard
- Fully Documented CLI
- Telnet and HTTPs access
- TR-069***, TFTP, HTTP, HTTPS configuration/firmware up- and download
- SNMPv3 agent
- Separate config domain (LAN side config and WAN side config)
- MIB II and private MIB
- Built-in diagnostic tools
- Secure Auto-Provisioning with built in root CA
|
Dimensions & Weight
|
- 1 port:
- Weight: 2.4 oz (68 g)
- Dimensions: 3.8 L x 1.65 W x 0.75 H in. | (9.7 L x 4.2 W x 1.9 H cm.)
- 2&4 port
- Weight: 3.2 oz (90 g)
- Dimensions:1.5 H x 4.13 W x 3.75 D in. | (3.81 H x 10.5 W x 9.53 D cm)
|
| Power |
- 1 port: 110–230 VAC (50/60 Hz) - 3 Watts
- 2&4 port: 110–230VAC (50/60 Hz) - 7 Watts or PoE: IEEE 802.3af Class 2
|
| Environment |
- Operating temperature: 32 to 104°F (0 to 40°C)
- Operating humidity: up to 90%, non-condensing)
- Industrial SmartNode - see SN4141E
|
|
|
