|
|
|
CA-LLD-DC100-L500 - Liquids Leak Detection, Water Detection Cable w/o Position, 50m length
by ICP DAS
|
|
|
|
CA-LLD-DC100-L500_SUMMARY.html
- Liquid leak detection
- Leak detection triggers an audible alarm
- A mute button to silence the alarm
- Two LED indicators to display the status of the power and the alarm
- A configurable relay output
- Leader cables and sensor cable can be up to 500 meters
- Adjustable detection sensitivity
- Supports DCON and Modbus RTU protocols
- Embedded Dual Watchdog
- Wide Operating Temperature Range: -25 to +75C
- Tiny form factor with easy screw mounting (DIN mount versions are available)
|
|
|
CA-LLD-DC100-L500_DESCRIPTION.html
CA-LLD-DC100-L500 is a low-cost, intelligent liquid leak detection device that can be used to directly control Relay Output. No additional conversion module is needed and the iSN-101 can be easily integrated with a variety of monitoring systems to achieve remote alarm and remote device control. The iSN-101 Liquid Leak Detection module can be used to monitor double-core leader cable, with lengths of up to 500 meters, and can be used with both the sensor cable and its included water leakage probe (S3 modules include probe, otherwise sold separately). If liquid is detected, the controller immediately activates the output relay - the normally open, normally closed passive output signal. The module can be easily integrated with other collection hosts connected to the network. The iSN-101 is suitable for real-time leak detection in critical locations, such as computer room base stations, warehouses, libraries, museums and industrial sites, and also for air handling equipment, refrigeration units, liquid containers, or pump tanks, etc., where there is a need to monitor any leakage of the equipment.
CA-LLD-DC100-L500.html
I/O Specifications
| Analog Input |
| Channels |
1 |
| Wiring Cables Length |
500 meters (inlcuding sensor cable) |
| Sound Off button |
Button used to stop the audible alarm |
| Adjustment of Detection Sensitivity |
25 KO ˜ 580KO |
System Specifications
| Communication |
| Interface |
RS-485 |
| Format |
N,8,1 / O,8,1 / E,8,1 / N,8,2 |
| Baud Rate |
Software Configuration: 1200 ˜ 115200 bps |
| Protocol |
Modbus RTU or DCON |
| Node Addresses |
96 ˜ 127 for hardware configuration ˜ 255 for software configuration |
| LED Indicators |
| LED indicators |
1 as Power Indicator, 1 as Alarm Indicator |
| Relay Output |
| FORM C Relay |
0.5A @ 125 Vac, 2 A @ 30 Vdc |
| EMS Protection |
| ESD (IEC 61000-4-2) |
±8kV Air for Random Point |
| EFT (IEC 61000-4-4) |
±4kV for Power |
| Power |
| Reverse Polarity Protection |
Yes |
| Input Voltage Range |
10 to 30 Vdc |
| Consumption |
1.5 W max. |
| Mechanical |
| Dimensions (W x L x H) |
83 mm x 70 mm x 29 mm |
| Installation |
DIN-Rail (DIN version modules)or Screw Mounted (standard modules) |
| Environment |
| Operating Termperature |
-25 to +75C |
| Storage Temperature |
-30 to +80C |
| Humidity |
10 to 90% RH, non-condensing |
Ordering Information
| iSN-101 |
1-channel Liquid Leak Detection Module (ROHS) |
| iSN-101/DIN |
1-channel Liquid Leak Detection Module (DIN-rail mount) (ROHS) |
| iSN-101/SiSN-101/S/DIN |
1 channel Liquid Leak Detection Module (ROHS)Includes an iSN-101 module, a 1m Liquid leak detection
cable and 3m extended cable. (DIN or Screw Mount) |
| iSN-101/S2iSN-101/S2/DIN |
1-channel Liquid Leak Detection Module (RoHS)Includes an iSN-101 Module, a 3m Liquid Leak Detection
Cable and 3m Extended Cable.(DIN or Screw Mount) |
| iSN-101/S3iSN-101/S3/DIN |
1-channel Liquid Leak Detection Module (RoHS)Includes an iSN-101 Module and a Leakage Probe.(DIN or
Screw Mount) |
| iSN-101/S CR = iSN-101 + CA-LLD-DC100-L010 + CA-LLD-EC-L030 |
iSN-101/S2 CR = iSN-101 + CA-LLD-DC100-L030 + CA-LLD-EC-L030 |
iSN-101/S3 CR = iSN-101 + CA-LLD-DP100 |
|
l');
?>
|
