|
|
|
tM-7530 - Intelligent tiny RS-232/CAN converter. 9-pin female D-Sub. 1W power consumption, DIN-Rail mountable. Has operating tem
by ICP DAS
|
|
|
|
tM-7530_SUMMARY.html
- Compatible with CAN specification 2.0A and 2.0B
- Fully compatible with ISO 11898-2 standard
- Support various CAN baud rate from 10K bps to 1M bps
- Support user-defined CAN baud rate
- Support various RS-232 baud rate from 110 bps to 230400 bps
- External option 120 O terminator resistor
- Software configurable CAN and RS-232 communication parameters
- Power, data flow and error indicator for CAN and RS-232
- Watchdog inside
- Support pair connection mode
- Software buffer on CAN bus side and RS-232 side
- Support user-defined end of characters on pair connection mode
- Support listen only mode
- Support time stamp response on RS-232 side
|
|
|
tM-7530_DESCRIPTION.html
The tM-7530 is a tiny RS-232/CAN to fit narrower environment as a result of its small size. It has isolation on power side and on CAN bus side and its performance is faster than other RS-232/CAN module. The function of tM-7530 can full compatibly with I-7530 and I-7530T. Besides, it provides new function such as listen only. User can use this function to listen CAN bus messages and error detection. According to above features, tM-7530 is an economical and practical RS-232/CAN converter solution.
tM-7530.html
| CAN Interface |
| Transceiver |
NXPTJA1042 |
| Chanel Number |
1 |
| Connector |
Spring type connector |
| Baud Rate (bps) |
10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 Mbps |
| Isolation |
3000 VDCfor DC-to-DC, 2500 Vrms for photo-couple |
| Terminator Resistor |
External option terminator resistor |
| Specification |
ISO-11898-2, CAN 2.0A and CAN 2.0B |
| RS-232 Inteface |
| Connector |
9-pin female D-Sub (TxD, RxD, GND, N/A for others) |
| Baud Rate (bps) |
110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 |
| Data Bit |
5, 6, 7, 8 |
| Stop Bit |
1, 2 |
| Parity Bit |
None, Even, Odd |
| LED |
| Round LED |
ON LED: Power and Data Flow; ERR LED: Error Status |
| Power |
| Protection |
Power reverse polarity protection, Over-voltage brown-out protectio |
| Power Consumption |
1W |
| Mechanism |
| Installatin |
DIN-Rail |
| Dimensions |
52mm x 86mm x 32mm (W x L x H) |
| Environment |
| Operating Temperature |
-25C ~ +75C (-13F ~ +176F) |
| Storage Temperature |
-30C ~ +80C (-22F ~ +176F) |
| Humidity |
10 ~ 90% RH, non-condensing |
|
l');
?>
|
