I-2533CS-FD - CAN/CAN FD to Single-mode Fiber Bridge Converter
by ICP DAS

The I-2533CS-FD is a local CAN/CAN FD (CAN with Flexible Data-Rate) bridge used to establish a connection between two CAN bus system via single mode fiber optic transmission medium. In order to solve the problem between CAN/CAN FD and fiber transmission medium, the I-2533CS-FD is specially designed for converting the electrical CAN/CAN FD bus signal to fiber optic cables. Besides, I-2533CS-FD has three more important features. First, the transmission distance limitation of the CAN bus system will not affected due to the different CAN/CAN FD baud rate. It means that the total CAN/CAN FD bus working distance can be extended. Second, the bus error on one CAN/CAN FD network will not affect the operation of another CAN/CAN FD network. Finally, the two CAN/CAN FD network can communication with each other by using different CAN/CAN FD baud rate for highly flexibility.

LED Indicators
Status	1 x Power, 3 x CAN status, 2 x Fiber status
Fiber
Fiber Cable	8.3/125, 8.7/125, 9/125 or 10/125 µm
Wavelength	1310 nm
TX Output	-15 dBm Min. , -8 dBm Max.
RX Sensitivity	-34 dBm Max.
RX Overload	-5 dBm Max.
Budget	19 dBm
Propagation Delay	190 us (*Note1)
Distance Between Stations	30 km (9/125 µm recommended)
USB
Specification	USB 2.0 High Speed (480Mbps)
Connector	USB Type B, Mini-B
Driver	Built-in Windows 7/8.1/10
Power
Input Range	+10 VDC ~ +30 VDC
Consumption	4 W Max.
CAN
Ports	1
Baud Rate	CAN bit rates: 10 k ~ 1 M bps, CAN FD bit rates for data field: 100 k ~ 10M bps (*Note2)
Terminal Resistor	Switch for 120Ω terminal resistor
Specification	ISO 11898-2, CAN 2.0 A/B and FD
Filter	Yes
Power
Input Range	+10 VDC ~ +30 VDC
Consumption	3 W
Mechanical
Casing	Plastic
Dimensions (mm)	33 x 127 x 101 (W x L x H)
Installation	DIN-Rail
Environmental
Operating Temperature	-25 ~ +75C
Storage Temperature	-30 ~ +80C
Humidity	10 ~ 90% RH, Non-condensing

I-2533CS-FD.pdf

536 K