RPAL12/48M-720-720 - RemotePro 12/24/48V 100W Continuous Remote Power System,720W Solar Panel & Mount, Aluminum Enclosure, 12/24
by Tycon Systems

RPAL12/48M-720-720, the RemotePro 720W Series outdoor power systems are designed for applications that require a primary off-grid power source to run various equipment. The vented weatherproof enclosures have generous space available inside for mounting customer equipment. Multiple mounting brackets are welded inside the enclosure for mounting DIN rails or flat plates.

The systems are available with MPPT temperature compensated solar charge controllers with an RS485 interface for remote monitoring with a Tycon TPDIN-Monitor-WEB3 or TP-SC-WIFI adapter. The solar controllers turn off the load automatically if the battery voltage drops too low, in order to preserve battery life. The load turns on automatically once the battery voltage recovers.

The outdoor enclosures are diamond plate aluminum ground mount. They are hinged and gasket sealed with locking closures. They have four cable gland ports for CAT5/6 cable, antenna cables/connectors or other cabling. Included is a thermostatically controlled fan assembly which turns on automatically when the temperature exceeds 45°C.

The high quality solar panels have a 25 year power output guarantee and a +5W output tolerance.

Batteries are a Non-Spillable Valve Regulated Sealed Lead Acid Absorbed Glass Matt (AGM) type which have excellent temperature and deep discharge performance. Expected battery life exceeds 5 years.

The systems come with all cabling required to connect the batteries to the controller and 20’ outdoor rated cable to connect the solar panels to the controller.

The solar mount includes the concrete anchors that are necessary for mounting. Tilt adjustment range is 10-65 deg and can be adjusted by one person. The mount can be expanded to hold 4 panels (Kit # TPSM-350x4-AdapterKit) or 6 panels (Kit# TPSM-350x6-AdapterKit). This is useful if more solar capacity is needed in the future.

12/48 MPPT Controller Type MPPT with display and RS485 Controller Outputs 20A or 30A Wire Terminal Bulk Charge 14.4V @ 12V Battery 28.8V @ 24V Battery 57.6V @ 48V Battery Float Charge 13.8V @ 12V Battery 27.6V @ 24V Battery 55.2V @ 48V Battery Over-discharge protection 11.1V @ 12V Battery 22.2V @ 24V Battery 44.4V @ 48V Battery Over-discharge recovery volts 12.6V @ 12V Battery 25.2V @ 24V Battery 50.4V @ 48V Battery Controller Self Consumption <1W

Battery Life 5+ years Enclosure Type ENC-AL-65x18x20 Ground Mount, Diamond Plate Aluminum Enclosure Size 65 x 18 x 20” (1651 x 457 x 508mm) Internal Mount Features DIN Rail/Flat Plate Mounting Brackets Welded to Door and Back Solar Panel Dims (L x W x T) 720W Solar Array 78 x 77 x 1.6” (1980 x 1956 x 40mm) Operating Temperature -30°C to +60°C (-22°F to 140°F) System Weight (no batteries) 394 lb (179 kg) Battery Weight 127 lb (57.6 kg) (Each 180Ah Battery) Wind Speed Rating 90MPH

RPAL12_48M-720-720.pdf

473 K