I-7083D - I-7083 with LED display
by ICP DAS

I-7080D is designed to provide signal conditioning system monitoring and safe value settings. I-7080 is a Counter/Frequency Input Module with a display. It is a cost-effective solution for a wide range of valuable industrial control signals and systems. The DCON utility can help users to configure and test I-7080 High Speed Counter / Frequency Input module. Plenty of library functions and demo programs are provided to let users develop programs easily under Windows, Linux and DOS operating systems. The communication interface is modbus protocol via RS-485. Users may mount the modules on a DIN rail, panel or wall. Modules have a screw-terminal block to connect to the signals.

Counter Input
Channels	3-axis
Input Type	Isolated
Encoder Mode	Quadrant counting mode, CW/CCW counting mode, Pulse/Dir counting mod
Isolation Voltage	Input level 5V	Logic High : 3.5V~5V
		Logic Low :0V~2V
	Input 12V with external resistor 1K ohm	Logic High: 5V~12V
		Logic Low :0V~2V
	Input 24V with external resistor 2K ohm	Logic High:7V~24V
		Logic Low :0V~2V
Maximum Count	32bit
Maximum counting rate	1MHz
Interface
Interface	RS-485
Format	N, 8, 1
Baud Rate	1200 ~ 115200bps
LED Display
1 LED as Power/ Communication indicator
5-digit readout (for I-7083D)
Power
Input Voltage Range	10~30VDC
Power Consumption	1.5W (max.)(I-7083) / 1.7W (max.)(I-7083D)
Environment
Operating Temperature	-25 to 75°C
Storage Temperature	-40 to 85°C
Humidity	5 to 95%, non-condensing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Has Battery Backup

 

I-7083D.pdf

1,155 K