ICP DAS I-7017F - 8-channel analog input module
by ICP DAS

2 Channel8 Channel Analog Input (Voltage Input and Current Input) Data Acquisition Module, communicable over RS-485. Supports 10 Samples/ Second (Normal Mode) / 60 Sample/ Second (Fast Mode) total . 15.7Hz (Normal Mode) / 78.7Hz (Fast Mode) Comes with FREE EZ Data Logger Software. Supports operating temperatures between -25 °C ~ +75°C (-13°F ~ +167°F). Counter / Frequency Input Data Acquisition Module with 2 DO Channels. I-7080B and I-7080BD have Battery Backup. I-7080D and I-7080BD have LED Display communicable over RS-485. Supports operating temperatures between -25 to 75°C.

Description
Specification
Datasheet

I-7017F is a cost-effective solution for a wide range of valuable industrial control signals and systems. The DCON utility can help users to configure and test the I-7017F Analog Input Modules. Plenty of library functions and demo programs are provided to let users develop programs easily under Windows, Linux and DOS operating systems. Users may mount the modules on a DIN rail, panel or wall. Modules have a screw-terminal block to connect to the signals. I-7017F comes with FREE EZ Data Logger Software.

Analog Input
Input Channels	8 differential or 6 differential and 2 single- ended by jumper select
Input Type	mV, V , mA (requires optional external 125 ohm resistor)
Resolution	16-bit / 12-bit
Input range	± 150mV, ± 500mV , ± 1V, ± 5V, ± 10V and ± 20mA
Mode Sample rate	Normal mode: 16-bit 10 samples/second (total)
Mode Sample rate	Fast Mode: 12-bit 60 samples/second
BandWidth	15.7Hz (normal) 78.7Hz (Fast)
Accuracy	± 0.1% (Normal) ± 0.5% (Fast)
Zero drift	± 20uV/°C
Span drift	± 25ppm/°C
CMR @ 50/60 Hz	86 dB min
NMR @ 50/60 Hz	100dB
Over voltage protection	± 35V
Communication Interface
Interface	RS-485
Power Supply
Input	+10 to +30VDC
Consumption	1.3W