ICP DAS I-87017DW - 8 Channel Differential / 16 Single Ended Analog Input with High Voltage Protection
by ICP DAS

8-channel Differential/16-channel Single-Ended Analog Input Module with High Voltage Protection

Description
Specification
Datasheet

I-87017DW is a serial interface and 8-channel Differential/16-channel Single-Ended analog input module. The analog input range is software selectable and supports +/-10V, +/-5V, +/-1V, +/-500mV, +/-150mV, and +/-20mA. Differential and Single-ended mode is selected by jumpers.

8-channel Differential/16-channel Single-ended Analog Input
D-Sub 37 Connector
4 kV ESD Protection
Dual Watchdog
3000 VDC Intra-Module Isolation, Field to Logic
A Wide Range of Operating Temperature: -25 °C~ 75 °C
RoHS Compliance

Analog Input
Input Channels	8 Differential/16 Single-Ended
Input Type	+/-10 V, +/-5 V, +/-1 V, +/-500 mV, +/-150 mV -20mA ~ +20mA(Only Differential Mode, Requires Optional External 125 Ohm Resistor)
Resolution	16-bit/12-bit
Sampling Rate	Normal Mode: 16-bit,10 Samples/Sec. (Total)
Sampling Rate	Fast Mode: 12-bit, 60 Sample/Sec. (Total)
Accuracy	Normal Mode :+/- 0.1% of FSR
Accuracy	Fast Mode :+/- 0.5% of FSR
-3dB Band Width	15.7Hz
Zero Drift	+/- 20 μV/ °C
Span Drift	+/- 25 ppm/ °C
Common Mode Rejection	86 dB
Normal Mode Rejection	100 dB
Input Impedance	Differential Mode: >2M Ohms, Single-ended Mode: >1M Ohms
Overvoltage Protection	Differential Mode: 240 Vrms, Single-ended Mode: >120 Vrms
ESD Protection	4 kV Contact for each terminal.
Open Daughter-Board Detection	Yes
Individual Channel Configuration	Yes
Connector	DB37
Intra-module Isolation, Field to Logic	3000 VDC
Watchdog
Dual Watchdog	Yes, Module(1.6 sec) and Communication(Programable)
LED Display
1 LED as Power/Communication Indicator
Power
Power Consumption	Maximum: 1.4W
Environment
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-30 ~ +80 °C
Humidity	10 ~ 90% RH, non-condensing
Dimensions
30 mm x 102 mm x 115 mm(W x L x H)