|
|
|
FPX6000R/A/PD48 – FiberPlex DanteAV over IP Gateway (Receiver); 1 HDMI Output; 2 x USB 2.0; 1 x USB OTG; Serial (RS422); IR
by PATTON
|
|
|
|
FPX6000R_A_PD48_SUMMARY.html
Perfect Audio and Video Synchronization - Utilizing a Single Network Clock, Independent
routing of Audio and Video anywhere on the network while maintaining perfect synchronization.
Trusted Dante Audio - Dante protocol timing and synchronization significantly reduces harmonic distortion and
phasing caused by jitter, wander and delay typically found on standard Ethernet networks.
Supports Mixed Networks - Dante ensures that your time-sensitive audio/video streams always get enough
reserved bandwidth even while on a standard Ethernet network.
Expanded Coverage - Break away from legacy point-to-point topology. Withunicast and multicast, command,
control and reliability for distributed audio video systems is made simple tapping into already existing
Dante-enabled Ethernet networks.
Interoperability -
- Instantly connect to any Dante-enabled products currently available today
- HDCP2.3 over IP compliant
|
|
|
FPX6000R_A_PD48_DESCRIPTION.html
Patton's™ FPx6000R-A-PD48 - enables Dante AV with8 audio channels (transmit or receive) and 1 HDCP
encryption support video channel (transmit or receive) to be easily inserted onto an existing Ethernet network
backbone without suffering the performance issues and management difficulties associated with audio and video over
IP.
Dante's™ sub-microsecond synchronization of audio and video eliminates alignment problems. Dante AV
uses a single network clock for the entire system in sync regardless of the number of endpoints,
transporting audio and video with low deterministic latency.
In addition to providing high performance Dante
AV withaudio/video-over-IP, the FPx6000 is loaded with peripheral connectivity options including USB 2.0 and USB OTG
for keyboard and mouse, infrared for remotes, even serial signals for PTZ control and more… all over
IP!
Patton's™ FPx6000 enables Dante AV with8 audio channels (transmit or receive) and 1 HDCP encryption
support video channel (transmit or receive) to be easily inserted onto an existing Ethernet network backbone without
suffering the performance issues and management difficulties associated with audio and video over
IP.
Dante's™ sub-microsecond synchronization of audio and video eliminates alignment problems. Dante AV
uses a single network clocksingle network clock for the entire system in sync regardless of the
number of endpoints, transporting audio and video with low deterministic latency.
In addition to providing
high performance Dante AV withaudio/video-over-IP, the FPx6000 is loaded with peripheral connectivity options
including USB 2.0 and USB OTG for keyboard and mouse, infrared for remotes, even serial signals for PTZ control and
more… all over IP!
The Controller makes routing, controlling and
monitoring your audio and video traffic and endpoints as simple as clicking a button.The Controller makes routing, controlling and monitoring your audio and video traffic and
endpoints as simple as clicking a button.The Controller makes routing, controlling and monitoring your audio
and video traffic and endpoints as simple as clicking a button.
FPX6000R_A_PD48.html
| Audio |
- Up to eight channels at 44.1, 48, 88.2 or 96 kHz. HDCP sourced audio channels limited to 48 kHz
- High-quality, low jitter with on-board clock generator for audio
- Up to 8192 samples (170 ms @ 48 kHz) audio buffering per channel (receiver only)
- Built-in 8-channel asynchronous sample rate converter (in transmitter only)
- Bit depths: 24, 16, and 32 bits per audio sample
- Sample rate pull-up/down (+4.1667, +0.1, -0.1, and -4.0 %)
- Acoustic Noise Typical: 31.2dBA
|
| Network |
- 2 x 10/100/1000BaseTx
- Dante Network Port
- Switch or Daisy-chain
- PoE (PD-Powered Device)
- Hardware time-stamping, supporting sample-accurate playback
- Audio Flows In/Out: Up to 8x8 (unicast or multicast
- Video Flows In/Out: 1x1 (unicast or multicast)
|
| Video |
- 1 HDMI 2.0/1.4b input (T model) or output (R model)
- Latency: 8-ms delay from HDMI input to HDMI output for a 60-Hz video
- Built-in HDCP encryption/decryption for video
- HDCP 2.2 input/output, HDCP 2.3 over network
- 800 Mbps recommended maximum bit rate
- Accepts any bit stream from external codec
- Video transport formats: Dante Video over IP
- Up to 4K60 input/output
- HDR support
- HDMI monitor output loop-through (T model)
- JPEG2000
|
| Control Interfaces(Peripherals) |
- 2 x USB 2.0 (HID) Type A for keyboard and mouse
- USB On The Go (OTG) for keyboard and mouse
- RS422/VISCA for PTZ camera input control (RJ45)
- IR 3mm infrared control over IP
|
| Panel Status LEDs |
- Power
- CODEC
- Dante software
- Dante software/system
- Clock Synchronization (master, slave, progress)
- Error
- HDCP status
|
| Software |
- Full Dante API support
- Support for HDMI management
- Support for fully validated HDCP management
- EDID management
- Serial/IR/USB HID/CEC over IP support
|
| Physical |
- 9.15L x 5.72D x 1.75H inch (23.34L x 14.53D x 4.45 H cm)
- Weight: 2.85 lbs (1.29 kg)
|
| Power |
- 48 VDC 0.75 A input
- 802.3bt (60-90W)
|
| Operational Temperature |
|
|
|
