|
|
|
CL1151E/PAFA/BNC/EUI-2PK - CopperLink Industrial Dante and PoE+ Ethernet Extender Kit (Local and Remote); BNC; 1 x 10/100; 802.3
by PATTON
|
|
|
|
- Dante Ethernet Extension—Extends 10/100Base-TX Ethernet over 3,300 feet (1005 meters) using 2-wire, 18-26-AWG twisted-pair, Cat 3, Cat 5e/6/7, or coaxial cable.
- Delivers PoE—PowerPlus technology powers up both the remote CopperLink extender and the Dante PoE enabled device connected to it. No power is required at the remote location.
- Transparent LAN Bridging—Will pass higher layer AES67/TSN/AVB protocols and all audio/video compression schemes.
- Plug and Play—Modems need no configuration to operate, Ethernet ports are auto-sensing 10/100, full or half-duplex.
- Overvoltage Protection—Overvoltage protection on Line and Ethernet ports prevents damage from ESD (electrostatic discharge), CDE (cable discharge events), and lightning.
- Made in the USA—This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.
|
|
|
The Patton Model CL1151E-PAFA-BNC-EUI-2PK enables Ethernet connectivity of your Dante enabled devices over previously installed copper infrastructure, such as existing speaker, alarm cables even CCTV coaxial cable.
Instantaneously install your 10/100BaseTX Dante enabled speakers, I/O converters and more—with no additional overhead cost. With the extended reach the CL1151E kit provides, you can install your IP Audio Video and teleconferencing equipment exactly where you want it!
| Line Interfaces (Data) |
- 1 x RJ45 or BNC (Coax)
- Supports 1-4 pairs
|
| Ethernet Interfaces |
- 1 x RJ45 Auto-Sensing 10/100Base-TX with full or half-duplex operation
|
| LEDs |
- Power, Line, (10 or 100 operation), Eth, and PoE
|
| Protocol |
- Transparent to high layer AES67/AVB/TSN Ethernet protocols.
- Supports 802.1Q VLAN tagged frames
- Transparent to IP video schemes
- Fully transparent to compression schemes such as WMV, MPEG-4, and MJPEG
|
| Overvoltage Protection (Line and Ethernet) |
- IEC 61000-4-2 (ESD) 25kV (air), 15kV (contact)
- IEC 61000-4-4 (EFT) 40A (5/50ns)
- IEC 61000-4-5 (lightning) 25A (8/20μs)
|
| Power Injection (PSE only) |
- DC voltage on Ethernet port
- 54 VDC
|
| Power Consumption |
|
| Power Supply |
- External AC Adapter 100–240 VAC to 54 VDC
- Input: 30–57 VDC (Recommended 54 VDC)
|
| MTBF |
|
| Environment |
- Temperature: -10 to 70°C
- Humidity: 10 to 95% (non-condensing)
|
| Physical |
- 1.19 W x 4.28 H x 3.36 D in. (30.2 W x 108.7 H x 85.3 D mm)
- 0.78 oz (22 g)
|
| Compliance |
- FCC Part 15A, Class B
- CE Mark
- EMC Directive 89/336/EEC
- LVD Directive 73/23/EEC
|
|
|
