|
|
CL1151E/PAFA/TB/EUI-2PK - CopperLink Industrial Dante and PoE+ Ethernet Extender Kit (Local and Remote); 2 Wire Terminal Block; by PATTON
|
|
|
- Dante Ethernet Extension—Extends 10/100Base-TX Ethernet over 3,300 feet (1005 meters) using 2-wire, 18-26-AWG twisted-pair, Cat 3, Cat 5e/6/7, or coaxial cable.
- Delivers PoE—PowerPlus technology powers up both the remote CopperLink extender and the Dante PoE enabled device connected to it. No power is required at the remote location.
- Transparent LAN Bridging—Will pass higher layer AES67/TSN/AVB protocols and all audio/video compression schemes.
- Plug and Play—Modems need no configuration to operate, Ethernet ports are auto-sensing 10/100, full or half-duplex.
- Overvoltage Protection—Overvoltage protection on Line and Ethernet ports prevents damage from ESD (electrostatic discharge), CDE (cable discharge events), and lightning.
- Made in the USA—This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.
|
|
|
The Patton Model CL1151E-PAFA-TB-EUI-2PK enables Ethernet connectivity of your Dante enabled devices over previously installed copper infrastructure, such as existing speaker, alarm cables even CCTV coaxial cable.
Instantaneously install your 10/100BaseTX Dante enabled speakers, I/O converters and more—with no additional overhead cost. With the extended reach the CL1151E kit provides, you can install your IP Audio Video and teleconferencing equipment exactly where you want it!
Line Interfaces (Data) |
- 1 x RJ45 or BNC (Coax)
- Supports 1-4 pairs
|
Ethernet Interfaces |
- 1 x RJ45 Auto-Sensing 10/100Base-TX with full or half-duplex operation
|
LEDs |
- Power, Line, (10 or 100 operation), Eth, and PoE
|
Protocol |
- Transparent to high layer AES67/AVB/TSN Ethernet protocols.
- Supports 802.1Q VLAN tagged frames
- Transparent to IP video schemes
- Fully transparent to compression schemes such as WMV, MPEG-4, and MJPEG
|
Overvoltage Protection (Line and Ethernet) |
- IEC 61000-4-2 (ESD) 25kV (air), 15kV (contact)
- IEC 61000-4-4 (EFT) 40A (5/50ns)
- IEC 61000-4-5 (lightning) 25A (8/20μs)
|
Power Injection (PSE only) |
- DC voltage on Ethernet port
- 54 VDC
|
Power Consumption |
|
Power Supply |
- External AC Adapter 100–240 VAC to 54 VDC
- Input: 30–57 VDC (Recommended 54 VDC)
|
MTBF |
|
Environment |
- Temperature: -10 to 70°C
- Humidity: 10 to 95% (non-condensing)
|
Physical |
- 1.19 W x 4.28 H x 3.36 D in. (30.2 W x 108.7 H x 85.3 D mm)
- 0.78 oz (22 g)
|
Compliance |
- FCC Part 15A, Class B
- CE Mark
- EMC Directive 89/336/EEC
- LVD Directive 73/23/EEC
|
|
|