I-7567 - USB To HART Protocol Converter

ICP DAS I-7567 - USB To HART Protocol Converter with Software Setup Utility. Compatible with USB 1.1 and 2.0 standard. Microsoft
by ICP DAS

I-7567_SUMMARY.html

Support HART Short/Long frame
Support HART Burst mode
Support point-to-point or multi-drop HART mode
Support connecting up to 15 HART slave devices
Allow two HART masters
Provide utility tool for module configuration and HART communication
No external power supply (powered by USB)
Support firmware update via USB
Provide PWR / Tx / Rx indication LED
4KV ESD Protection
Selectable 250O load resistor

Description
Specification
Datasheet

I-7567_DESCRIPTION.html The I-7567 is a USB to HART converter designed for the master device of HART protocol. It allows users to access the HART slave by using virtual COM-port. It can be used with HART slave devices like transmitters, actuators, current output devices, etc. It also comes with free utility tool for configuration.

I-7567.html

USB Interface
USB Port	USB Type B
Compatibility	USB 1.1 and 2.0 standard
Virtual COM Parameter	1200 bps, O(odd parity), 8(data bit), 1(stop bit)
HART Interface
Channel	1
Connector	2-pin screwed terminal block
Terminator Resistor	Selectable 250 O terminal resistor
4KV ESD Protection	Yes, Contact for each terminal.
Isolation Voltage	3000 VDC
LED
LED Display	PWR : Power Indicator Tx : Received Data from USB Indicator Rx : Received Data from HART Indicator
Power
Power supply	By USB Interface
Power Consumption	Maximum : 1.5W
Software
Driver	Windows 2000 / XP / Vista / 7 (32/64 bit)
Mechanism
Installation	DIN-Rail or Wall Mounting
Dimensions	108 mm x 72 mm x 35 mm (H x W x D)
Environment
Operating Temp.	-25 ? ~ +75 ? (-13 to 167?)
Storage Temp.	-30 ? ~ +75 ? (-22 to 167?)
Humidity	5% ~ 95%, non-condensing