I-7565M-FD_DESCRIPTION.html
I-7565M-FD is a USB to CAN/CAN FD (CAN with Flexible Data-Rate) converter with two CAN channels. It allows transmitting/receiving CAN/CAN FD frames and supports CAN2.0A/2.0B and CAN FD (ISO/Bosch) specifications and different baud rates for CAN/CAN FD frame. (10 kbps to 1000 kbps for CAN arbitration phase and 100 kbps to 3000 kbps for CAN FD data phase). When connecting I-7565M-FD to PC, PC will load the relevant device driver automatically (hot plug & play). Therefore, users can make data collection and processing of CAN Bus network easier and quicker by applying I-7565M-FD. The application fields can be CAN Bus monitoring, building automation, remote data acquisition, environment control and monitoring, laboratory equipment & research, factory automation, etc.
I-7565M-FD.html
| CAN Interface | | Transceiver | TI TCAN1042HG | | Channel Number | 2 | | Connector | 8-pin terminal-block connector | | Transmission Speed | CAN bit rates: 10 ~ 1000 kbps,
CAN FD bit rates for data field: 100 ~ 3000 kbps | | Terminal Resistor | DIP switch for the 120 ? terminal resistor | | Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photocoupler | | Specification | ISO 11898-2, CAN 2.0 A/B and FD | | CAN Filter Configuration | Selectable via Utility tool | | Receive Buffer | 128 data frames | | Max Data Flow | 3000 fps for Tx/Rx (Total CAN ports) | | USB Interface | | Connector | USB Type B x 1 | | Compatibility | USB 2.0 High Speed (480Mbps) | | Software Driver | Built-in Windows 7/8.1/10 | | LED | | Round LED | Power, MS, CAN1, CAN2, CAN1_ST, CAN2_ST LEDs | | Power | | Power supply | USB power delivery | | Power Consumption | 1.5 W (Max.) | | Mechanism | | Installation | Wall Mount | | Casing | Metal | | Dimensions | 111.0 mm x 102.0 mm x 27.0 mm (W x L x H) | | Environment | | Operating Temp. | -25 ~ 75C | | Storage Temp. | -30 ~ 80C | | Humidity | 10 ~ 90% RH, non-condensing |
|
