ICP DAS I-7565-H2 - High Performance Intelligent USB to 2-port CAN Converter. Supports operating temperatures between -25 to 75C
by ICP DAS

I-7565-H1 and I-7565-H2 are the high performance intelligent USB to CAN converters with one and two CAN channels separately. They provide faster CAN bus communication performance than I-7565. Both I-7565-H1 and I-7565-H2 support CAN2.0A/2.0B protocol and different baud rates from 5 Kbps to 1 Mbps. The important feature of I-7565-H1/H2 is to support the user-defined baud rate function no matter what the baud rate is. When connecting I-7565-H1/H2 to PC, PC will load the relevant device driver automatically (hot plug & play). Therefore, users can make data collection and processing of CAN bus network easier and quicker by applying I-7565-H1/H2. The application fields can be CAN bus monitoring, building automation, remote data acquisition, environment control and monitoring, laboratory equipment & research, factory automation, etc.

Item I-7565-H1 I-7565-H2 Hardware CAN Port Channels 1 2 CAN Interface Controller Microprocessor inside with 72MHz Microprocessor inside with 72MHz Transceiver NXP 82C250 NXP 82C250 Connector 9-pin D-sub connector 10-pin terminal-block connector Baud Rate (bps) 5K ~ 1Mbps or User-defined baud rate 5K ~ 1Mbps or User-defined baud rate Isolation 3000VDCfor DC-to-DC 2500Vrms for photo-couple 3000VDCfor DC-to-DC 2500Vrms for photo-couple Terminator Resistor Selectable 120O terminator resistor by jumper Selectable 120O terminator resistor by jumper Specification ISO-11898-2, CAN 2.0A and CAN 2.0B ISO-11898-2, CAN 2.0A and CAN 2.0B Pin Assignment C.I.A. DS-102 (CAN_H=7, CAN_L=2) (CAN1: CAN_H=4, CAN_L=2 ) / (CAN2: CAN_H=9, CAN_L=7 ) Receive Buffer 256 data frames 128 data frames for each CAN port Max Data Flow 3000 fps 3000 fps (Total CAN ports) USB Interface Connector USB Type B USB Type B Transmission speed 12M kbps 12M kbps Specification USB 1.1 and USB 2.0 standard USB 1.1 and USB 2.0 standard Receive Buffer 100 data frames 100 data frames LED Round LED PWR / RUN /ERR LED PWR / RUN /ERR LED Software Driver Windows 2K/XP, Linux WinCE (available soon) Windows 2K/XP, Linux WinCE (available soon) Power Power supply By USB interface By USB interface Power Consumption 1.5 W 1.5 W Dip Switch Init (Firmware Update) / Normal (Firmware Operation) Init (Firmware Update) / Normal (Firmware Operation) Mechanism Installation DIN-Rail DIN-Rail Dimensions 108mm x 72mm x 35mm (H x W x D) 108mm x 72mm x 35mm (H x W x D) Environment Operating Temp. -25 ~ 75 ? -25 ~ 75 ? Storage Temp. -40 ~ 80 ? -40 ~ 80 ? Humidity 5 ~ 95% RH, non-condensing 5 ~ 95% RH, non-condensing

Item	I-7565-H1	I-7565-H2
Hardware
CAN Port Channels	1	2
CAN Interface
Controller	Microprocessor inside with 72MHz	Microprocessor inside with 72MHz
Transceiver	NXP 82C250	NXP 82C250
Connector	9-pin D-sub connector	10-pin terminal-block connector
Baud Rate (bps)	5K ~ 1Mbps or User-defined baud rate	5K ~ 1Mbps or User-defined baud rate
Isolation	3000VDCfor DC-to-DC 2500Vrms for photo-couple	3000VDCfor DC-to-DC 2500Vrms for photo-couple
Terminator Resistor	Selectable 120O terminator resistor by jumper	Selectable 120O terminator resistor by jumper
Specification	ISO-11898-2, CAN 2.0A and CAN 2.0B	ISO-11898-2, CAN 2.0A and CAN 2.0B
Pin Assignment	C.I.A. DS-102 (CAN_H=7, CAN_L=2)	(CAN1: CAN_H=4, CAN_L=2 ) / (CAN2: CAN_H=9, CAN_L=7 )
Receive Buffer	256 data frames	128 data frames for each CAN port
Max Data Flow	3000 fps	3000 fps (Total CAN ports)
USB Interface
Connector	USB Type B	USB Type B
Transmission speed	12M kbps	12M kbps
Specification	USB 1.1 and USB 2.0 standard	USB 1.1 and USB 2.0 standard
Receive Buffer	100 data frames	100 data frames
LED
Round LED	PWR / RUN /ERR LED	PWR / RUN /ERR LED
Software
Driver	Windows 2K/XP, Linux WinCE (available soon)	Windows 2K/XP, Linux WinCE (available soon)
Power
Power supply	By USB interface	By USB interface
Power Consumption	1.5 W	1.5 W
Dip Switch	Init (Firmware Update) / Normal (Firmware Operation)	Init (Firmware Update) / Normal (Firmware Operation)
Mechanism
Installation	DIN-Rail	DIN-Rail
Dimensions	108mm x 72mm x 35mm (H x W x D)	108mm x 72mm x 35mm (H x W x D)
Environment
Operating Temp.	-25 ~ 75 ?	-25 ~ 75 ?
Storage Temp.	-40 ~ 80 ?	-40 ~ 80 ?
Humidity	5 ~ 95% RH, non-condensing	5 ~ 95% RH, non-condensing