|
|
|
M-7065B - 4-ch Isolated DI (Wet, 4~30 VDC) and 5-ch DC-SSR Output Module
by ICP DAS
|
|
|
|
M-7065B_SUMMARY.html
- 4 Digital Input channels and 5 DC SSR Output channels
- Form A DC Solid State Relay Output
- No Arcing, No Bounce, and No Switching Noise
- Sink- and Source-type for Digital Input
- Digital Input Channels can be used as 16-bit Counters
- Configurable Power-on Value Settings
- Configurable Safe Value Settings
- Dual Watchdog
- Wide Operating Temperature Range: -25 ~ +75C
|
|
|
M-7065B_DESCRIPTION.html
The I-7065B provides 4 digital input channels and 5 DC SSR output channels. All digital input channels can be used as 16-bit counters. In addition, the digital input channels can be selected either as sink- or source-type via wire connections. In comparison to electromechanical relays, SSR technology provides a faster response time and greater electrical endurance. The integration of DC SSR technology also eliminates potential for arcing, bounce, and switching noise. The I-7063BD provides 11 LED indicators and the I-7065BD/M-7065B D provides 9 LED indicators that can be used to monitor the status of the digital input and SSR output. There are also options for configuring power-on and safe values. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided to enhance noise protection capabilities in industrial environments. The M-7065B supports both the Modbus RTU and DCON protocols, which can be configured via software.
M-7065B.html
| CPU Module | | Watchdog Timer | Yes, Module (1.6 Seconds), Communication (Programmable) | | Isolation | | Intra-module Isolation | 3750 VDC | | EMS Protection | | EFT (IEC 61000-4-4) | ±2 kV for Power Line | | ESD (IEC 61000-4-2) | ±4 kV Contact for each Terminal
±8 kV Air for Random Point | | LED Indicators | | Status | 1 x Power and Communication | | Digital Input/Counter | | Channels | 4 | | Type | Wet Contact | | Sink/Source (NPN/PNP) | Sink/Source | | Wet Contact, ON Voltage Level | +1 VDC Max. | | Wet Contact, OFF Voltage Level | +4 ~ 30 VDC | | Max. Counts | 65535 (16-bit) | | Frequency | 100 Hz | | Min. Pulse Width | 5 ms | | Input Impedance | 3 kΩ | | Overvoltage Protection | ±35 VDC | | Relay Output | | Channels | 5 (Form A) | | Type | DC-SSR | | Contact Rating | Form A:
3 ~ 30 VDC @ 1A
5 A @ 30 VDC | | Leakage Current | 0.1 mA | | Operate Time | 1 ms | | Release Time | 1 ms | | Electrical Endurance | Long Life, No Arcing, No Bounce, No Switching Noise | | Surge Strength | 3500 VDC | | Power on Value | Yes | | Safe Value | Yes | | COM Ports | | Ports | 1 x RS-485 | | Baud Rate | 1200 ~ 115200 bps | | Data Format | (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1) | | Protocol | Modbus RTU, DCON | | Power | | Reverse Polarity Protection | Yes | | Input Range | +10 ~ +30 VDC | | Consumption | 0.6 W | | Mechanical | | Dimensions (mm) | 123 x 72 x 35 (W x L x H) | | Installation | DIN-Rail | | Environmental | | Operating Temperature | -25 ~ +75C | | Storage Temperature | -40 ~ +85C | | Humidity | 10 ~ 95% RH, Non-condensing |
|
l');
?>
|
