I-87069W has a serial bus (RS-485) communication interface with DCON protocol. It can be used with our WinPAC, XPAC, ViewPAC, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87069W is a Photo Mos Relay Output Module with 8 channels. I-87069W is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility.
| Digital Output |
| Output Channels |
8 |
| Output Type |
PhotoMOS Relay, Form A |
| Load Voltage |
350V max. at DC/ AC |
| Load Current |
0.13A max. |
| Turn On Time |
0.7m s (Typical) |
| Turn Off Time |
0.05ms (Typical) |
| Peak Load Current |
0.4A at 100ms |
| Output Off State Leakage Current |
1 uA |
| Output On Resistance |
23 Ohms |
| Intra-module Isolation, Field to Logic |
5,000Vrms |
| 4KV ESD Protection |
Yes, contact for each terminal |
| LED Display |
| 1 LED as Power/ Communication Indicator |
| 8 LEDs as PhotoMos Relay Output Indicators |
| Power |
| Power Consumption |
0.5W |
| Environment |
| Operating Temperature |
-25 to 75 °C |
| Storage Temperature |
-30 to 75 °C |
| Humidity |
5 to 95% RH, non-condensing |
| Dimensions |
| 30mm x 102mm x 115mm(W x L x H) |
|
