ICP DAS I-87061W - 16 channel Relay Output Module
by ICP DAS

16-channel Relay Output Module with Form A VAC and VDC relays

Description
Specification
Datasheet

I-87061W offers 16 channels for relay output. All of its channels are Form A type relay. I-87061W has 16 LED indicators for channel status as well as qualification for 4 kV ESD protection and 3750 Vrms intra-module isolation.

Support Relay Outputs
4 kV ESD Protection
3750 Vrms Intra-Module Isolation
RoHS Compliance
A Wide Range of Operating Temperature: -25 °C~ 75 °C

Relay Output
Channels		16 (Form A)
Type		Power Relay
Wiring		Four groups, each group providing four channels that share a single COM point.	Differential
Form Relay	Contact Rating	10 A @ 250 VAC/per Module COM point 10 A @ 24 VDC/per Module COM point Max. Single Relay Load Current 5 A at 25°C	3 A @ 250 VAC/per Channel 3 A @ 24 VDC/per Channel
	Min. Contact Load	10 mA @ 5 V
	Contact Material	Silver Tin Alloy
	Operating Time	10 ms
	Release Teime	5 ms
	Mechanical Endurance	2 × 10^7 ops.
	Electrical Endurance	1 × 10^5 ops.
Power-on Value		Yes
Safe Value		Yes

Communication
Interface	RS-485
Format	N, 8, 1
Baud Rate	1200 ~ 115200 bps
Protocol	DCON
Dual Watchdog	Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicators/Display
System LED Indicator	1 as Power/Communication Indicator
	Yes, 16 as Power Relay Output Indicators
I/O LED Indicator	14 ~ 17V
	Protection type : Shut down o/p voltage with auto-recovery
7-Segment LED Display	-
Isolation
Intra-module Isolation, Field-to-Logic	3750 VDC
EMS Protection
ESD (IEC 61000-4-2)	±4 kV Contact for each Terminal
	±8 kV Air for Random Point
Power
Power Consumption	1.5 W Max.	1.9 W Max.
Mechanical
Dimensions	102 mm x 30 mm x 115 mm	100 mm x 30 mm x 114 mm
Environment
Operating Temperature	-25°C ~ +75°C (-13°F ~ +167°F)
Storage Temperature	-40°C ~ +85°C (-40°F ~ 185°F)
Humidity	10 ~ 95% RH, Non-condensing