|
|
POE-POWERTAP-BT - PoE Splitter 802.3af/at/bt PoE input, up to 105W output on 2 position wire terminal by Tycon Systems
|
|
|
- 802.3bt 90W Power Only Splitter
- Also works with 802.3af, at and passive PoE
- PoE, PoE+ and PoE++ Compatible
- Full Metal Housing with LED power indicator
- Industrial strength operating range -40C to +70C
- 90W Maximum Output Power on Wire Terminal
|
|
|
The Low Cost POE-POWERTAP-BT is a PoE splitter which takes a PoE input and provides the DC voltage on a wire terminal connector. Maximum power out is specified at 90W. The device is compatible with 802.3af/at/bt and 2pair or 4pair passive PoE input. There is no data output. They have a full metal body for improved EMI and surge suppression and have integral mounting tabs. The PowerTap has built in electrical surge and overload protections and a unique LED status indicator. Incorporating a rugged, compact, in-line design, they are perfect for indoor use or outdoor use inside a weatherproof enclosure.
Input PoE Voltage |
44VDC to 57VDC (802.3af/at/bt) or 2 pair or 4 pair 48V Passive PoE |
Output Voltage |
44 to 57VDC, Voltage Output = Voltage Input, Efficiency 98.4% |
Maximum Load |
90W Max, 100uF Max |
Surge Protection |
IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact) |
MTBF (MIL-HDBK-217F 70C) |
961,723 Hrs |
Operating Temperature |
-40 to +70°C |
Storage Temperature |
-40 to +85°C |
Operating Humidity |
0% to 95% non-condensing |
Size (L x W x H) |
3.65 x 1 x 1” (93 x 25.4 x 25.4mm) |
Weight |
2.25oz (64g) |
Input Connector |
RJ45 Shielded Jack |
Output Connector |
Wire Terminal, Max wire size 12AWG |
|
|