|
|
|
WISE-7118Z/S - 10 channel Thermocouple Input with 6 channel Isolated Output with DB-1820
by ICP DAS
|
|
|
|
10-channel Thermocouple Input with High Voltage Protection and 6-channel Isolated Output PoE Module, web browser configurable, allows users to implement IF-Then Else If type control logic and communicable over Modbus TCP. MiniOS7 Operating System.
|
|
|
WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.
WISE-7118Z follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7118Z will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.
This multi-function module WISE-7118Z supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 16-bit, 10-channel differential analog inputs and 6-channel digital ouputs. Each analog channel is allowed to configure an individual range and has 240 Vrms high over voltage protection.
- Built-in Web Server for IF-THEN-ELSE rule setting
- Built-in IF-THEN-ELSE rule engine for logic operation
- No more programming. Just click and get done!
- Support IO, Counter, Timer, Email operations
- Modbus/TCP Protocol for SCADA Software Seamless Integration
- IEEE 802.3af-compliant Power over Ethernet (PoE)
- 10/100 Base-TX Ethernet
- Support Current Input, Voltage Input and Thermocouple Input
- Over Voltage Protection is up to 240 Vrms
- 6-channel Digital Outputs
- 2-way Isolation/ESD Protection
Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc.
Hardware Specifications |
| Analog Input |
| Input Channels |
10 (Differential) |
| Input Type |
+/-15 mV, +/-50 mV, +/-100 mV, +/-500 mV,+/-1 V, +/-2.5 V
+/-20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Requires Optional External 125 Ω Resistor)
Thermocouple (J, K, T, E, R, S, B, N,C, L, M, LDIN43710) |
| Resolution |
16-bit |
| Sampling Rate |
10 Samples/Sec. (Total) |
| Accuracy |
+/-0.1% or better |
| Bandwidth |
15.7 Hz |
| Zero Drift |
+/-0.5 uV/°C |
| Span Drift |
+/-25 ppm/°C |
| Input Impedance |
>300 kΩ |
| Common Mode Rejection |
150 dB Min. |
| Normal Mode Rejection |
100 dB |
| Overvoltage Protection |
240 Vrms |
Open Thermocouple
Detection |
Yes |
Individual Channel
Configuration |
Yes |
| ESD Protection |
+/-4 kV (Contact for each channel)
+/-8 kV air for random point |
| EFT Protection |
+/-4 kV for Power |
| Digital Output |
| Output Channels |
6 (Sink) |
| Output Type |
Isolated Open Collector |
| Max. Load Current |
700 mA/Channel |
| Load Voltage |
5 VDC ~ 50 VDC |
| System |
| CPU |
80186 CPU (80 MHz) |
| SRAM |
512 KB |
| Flash Memory |
512 KB |
| EEPROM |
16 KB |
| Dual Watchdog |
Yes |
| Communication |
| PoE Ethernet Port |
10/100 Base-TX (With Link, Activity LED Indicator) and automatic MDI/MDI-X |
| 2-Way Isolation |
| Ethernet |
1500 VDC |
| AI and DO |
2500 Vrms |
| LED Indicators |
| PoE |
PoE On |
| L1 |
Run |
| L2 |
Link/Act |
| L3 |
10/100 M |
| Power Requirements |
| IEEE 802.3af |
Class 1 |
| Required Supply Voltage |
Powered by Power over Ethernet (PoE) or auxiliary power +12 VDC ~ +48 VDC (non-regulated) |
| LED Indicator |
Yes |
| Power Consumption |
0.12 A @ 24 VDC Max. |
| Mechanical |
| Dimensions (W x H x D) |
72 mm x 123 mm x 35 mm |
| Installation |
DIN-Rail or Wall mounting |
| Environment |
| Operating Temperature |
-25 °C ~ +75 °C |
| Storage Temperature |
-30 °C ~ +80 °C |
| Humidity |
5 ~ 90% RH, non-condensing |
|
|
|
