|
|
|
Patton 2701A/I/EUI - T1/E1 to Ethernet NTU, RJ45/BNC WAN Interface, External 100-240VAC power supply
by PATTON
|
|
|
|
- Connect Legacy T1/E1 to Ethernet—Simple conversion of E1 or Fractional E1 to bridged to Ethernet. No configuration required.
- Supports 75 or 120-ohm E1 Lines—Both BNC and RJ-48C connectors are provided so there is no requirement for external conversions such as a balun
- Eliminate Routers—Bridge Ethernet across the WAN using industry standard PPP/BCP
- 10/100 Ethernet with MDI-X—Built-In communication crossover switch eliminates the confusion of straight through or cross over Ethernet cables.
- Power it Anywhere—Universal input AC (100-240V) and DC (-48V) power supply options
- Designed and Manufactured in the USA—Top notch quality and reliability
|
|
|
The Patton Model 2701A-I-EUI to Ethernet Bridge is the ideal solution for connecting any small to medium enterprise or remote office to an IP/Internet network using a standard T1/E1 interface.
The Model 2701A/I terminates T1 & E1 services for all n x kbps to 2.048 Mbps rates for simple connection to a router. Flexible clocking modes, AMI/HDB3 & AMI/B8ZS coding, V.52/V.54 diagnostics and more make the 2701A/I on of the most versatile NTU’s available.
The Model 2701A/I comes with an auto-sensing full-duplex 10/100Base-T Ethernet port, cross-over switch, and internal power supply. The Model 2701A/I is equipped with an integrated T1/E1 CSU/DSU for connection to full and fractional T1/E1 services.
AC or DC power options make installing the Model 2701 into your network infrastructure a snap.
| T1/E1 Interface |
- 1 x 120-Ohm RJ48C (RJ45) connection over twisted pair
- 1 x 75-Ohm BNC connection over coax
- Line Rate 1.544 Mbps (T1); 2.048Mbps (E1)
- DSX-1 levels for connection to local T1/E1 device (PBX)
- Line Coding AMI/B8ZS (T1); AMI/HDB3( E1)
- ESF coding and framing (T1)
|
| Ethernet Interface |
- 1 x 10/100 Auto-Sensing
- Built-in MDI-X cross-over switch
- IEEE 802.1d transparent learning bridge up to 1,024 addresses
|
| LED |
- Power
- E1/T1 Link
- E1/T1 Frame
- E1/T1 TD and RD
- Eth Link
- Eth 100M
- Eth TX and RX
|
| Management Interface |
- 1 x RS-232/EIA-561 (RJ45)
- Telnet
- VT-100 CLI
- Web/HTTP
- SNMP
|
| Compliance |
|
| Temperature |
|
| Physical |
Shipping
- Dimensions: 16 x 11 x 5 in. (40 x 28 x 13 cm)
- Weight 6 lbs (2.7 kg)
Boxed
- Weight: 2.25 lbs (1.0 kg)
Unit
- Dimensions: 7.3 x 6.6 x 1.62 in. (18.5 x 16.8 x 4.1 cm)
- Weight 0.8 lbs (0.36 kg)
|
| Power |
- External AC; 100–240 VAC or DC (-48 VDC)
|
|
|
|
|
