Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
TP-SW5G-D+ - 5 port High Power PoE 10/100/1000BASET switch.Requires 48-56V DC Power Source.IEEE 802.3at/af output, 802.3bt Input by Tycon Systems

TP-SW5G-D+ - 5 port High Power PoE 10/100/1000BASET switch.Requires 48-56V DC Power Source.IEEE 802.3at/af output, 802.3bt Input
by Tycon Systems

Write a review Write a review
  • Triple Power Inputs: 802.3bt PoE, Wire Terminal, 4 Pin DIN
  • Gigabit Compatible
  • Built-in Surge Protection
  • Automatic MDI/MDI-X Crossover
  • Automatic Speed and Duplex Sensing
  • Low Self Power and High Temperature Operation
  • DIN Rail Adapters included

 

Mfg SKU # : TP-SW5G-D+
List Price : $239.95
Our Price : $236.00
Stock : 90
Quantity :

The TP-SW5G-D+ is a fully automatic high speed Layer 2 Ethernet switch with one 802.3bt PoE input and four 802.3at PoE outputs. Ports 1-4 are 802.3at 35W PoE Out. The Uplink Port 5, is 802.3bt compatible so the switch can accept up to 100W PoE on 4 pairs to power the switch and connected devices remotely over CAT5 or higher Ethernet Cable. The Ethernet spec supports distances up to 100m (328ft). By using as a repeater, 200m total distance is realistic.

The switch can accept power via three different interfaces: Wire Terminal Connector, 4 pin Mini DIN connector or via 802.3at/bt PoE input to Uplink Port 5. Two different power inputs can be used for redundancy. The higher voltage takes priority.

The RJ45 connectors are shielded and grounded to the common “FG” (Frame Ground) connection. The units have 15kV surge protection on all Ethernet wires and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.

Ports

Port 1-4: 802.3at Mode B (4,5 +; 7,8 -)
Port 5: UPLINK 802.3bt Compatible PoE Input (also accepts 802.3at or Passive PoE)

Transmission Speed

1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation

Data/PoE Connections

Shielded RJ45, Grounded to FG connection

Input Voltage

Vin 44VDC to 57VDC on Wire Terminal or 4 Pin DIN or 802.3bt PoE on port 5

LED Function

Power on LED: Green = OK, Red = Fault
RJ45 LED’s:
Port 1-5 Right Hand LED: Link Light (Blinking) (Green = Gigabit, Yellow = 100Mb)
Port 1-4 Left Hand LED: PoE Power ON (Yellow On)
Port 5 Left Hand LED: PoE Power On (Yellow On = 4 Pair PoE ; Yellow Blinking = 2 Pair PoE)
PoE Protections Over Temperature, Over Current, Short Circuit
Surge Protection IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC61000-4-4 (EFT) 40A (5/50ns)
Self Consumption < 3 Watt Typical
Switch Technology Store and Forward, automatic MDI/MDI-X crossover
Protocol CSMA/CD
Flow Control IEEE802.3x(full-duplex), Back Pressure(half-duplex)
Data Transmission Rate 1488000pps , 148800pps, 14880pps ; Automatic speed and duplex sensing
Address Table 2K MAC, self-learning
Operating Temp -30 to +70°C (-22 to 158°F)
Operating Humidity (RH) 5% - 90% (non condensing)
Storage Temperature -40 to +85°C (-40 to +185°F)
Dimensions (LxWxH) 159 x 118 x 40mm (6.3 x 4.6 x 1.6”)
Weight 318g (11oz)
Frequently Bought Together

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.