Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
TP-SW5G-D-BT - 5 port High Power PoE 10/100/1000BASET switch.Requires 53-57V DC Power Source.IEEE 802.3bt 90W per port output by Tycon Systems

TP-SW5G-D-BT - 5 port High Power PoE 10/100/1000BASET switch.Requires 53-57V DC Power Source.IEEE 802.3bt 90W per port output
by Tycon Systems

Write a review Write a review
  • Mulitple Power Inputs: 802.3bt PoE to Port 5, Wire Terminal
  • Gigabit Compatible
  • Built-in Surge Protection
  • Automatic MDI/MDI-X Crossover
  • Automatic Speed and Duplex Sensing
  • Low Self Power and High Temperature Operation
  • DIN Rail Adapters included

Applications
• Power 4 802.3af/at devices from an 802.3bt (70W) PoE Input
• Power 4 802.3bt (up to 90W) from a wire terminal input
• Remote or Local Power for Cameras and Wireless Radios
• Also Functions as Ethernet/PoE repeater

 


Mfg SKU # : TP-SW5G-D-BT
List Price : $329.95
Our Price : $324.00
Stock : Call for Availability
Quantity :
The TP-SW5G-D-BT Power over Ethernet (PoE) 5 Port Gigabit switch offered by Tycon is a fully automatic high speed, high power, Layer 2 Ethernet switch with one 802.3bt PoE input and four 802.3bt PoE outputs. Ports 1-4 are 802.3af/at/bt compatible with up to 90W PoE Out per port utilizing 2 or 4 pairs for power. The Uplink Port 5, is 802.3bt compatible so the switch can accept up to 70W PoE on 4 pairs to power the switch and connected devices remotely over CAT5 or higher Ethernet Cable. The Ethernet spec supports distances up to 100m (328ft). By using as a repeater, 200m total Ethernet distance is realistic.

The switch can accept power via two different interfaces: Wire Terminal Connector (10A, approx 500W Max) or via 802.3bt PoE input to Uplink Port 5 (70W Max). Two different power inputs can be used for redundancy. The higher voltage takes priority.

The RJ45 connectors are shielded and grounded to the common “FG” (Frame Ground) connection. The units have 15kV surge protection on all Ethernet wires and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.

 

TP-SW5G-D-BT

Ports

Port 1-4: 802.3bt 90W per port, supports 2 or 4 pair power

Port 5: UPLINK 802.3bt Compatible PoE Input to 70W

Transmission Speed

1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation

Data/PoE Connections

Shielded RJ45, Grounded to FG connection

Input Voltage

Vin 53VDC to 57VDC on Wire Terminal or 802.3bt PoE on port 5

44-57V OK if powering 802.3af devices

50-57V OK if powering 802.3at devices

Note: Input power (watts) must be higher than total PoE power out (watts)

LED Function

Power on LED: Green = OK, Off = Fault

RJ45 LED’s: Port 1-5 Right Hand LED: Link Light (Blinking) (Green = Gigabit, Yellow = 100Mb)

Port 1-4 Left Hand LED:PoE ON 4 pair (Yellow On), PoE ON 2 pair (Yellow Blinking)

Port 5 Left Hand LED: PoE Power On (Yellow On)

PoE Protections

Over Temperature, Over Current, Short Circuit

Surge Protection

IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact)

IEC61000-4-4 (EFT) 40A (5/50ns)

Self Consumption

< 5 Watt Typical

Switch Technology

Store and Forward, automatic MDI/MDI-X crossover

Protocol

CSMA/CD

Flow Control

IEEE802.3x(full-duplex), Back Pressure(half-duplex)

Data Transmission Rate

1488000pps , 148800pps, 14880pps ; Automatic speed and duplex sensing

Address Table

2K MAC, self-learning

Operating Temp

-30 to +70°C (-22 to 158°F)

Operating Humidity (RH)

5% - 90% (non condensing)

Storage Temperature

-40 to +85°C (-40 to +185°F)

Dimensions (LxWxH)

159 x 118 x 40mm (6.3 x 4.6 x 1.6”)

Weight

318g (11oz)


Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.