af
by Tycon Systems

IEEE 802.3af High Power 10/100/1000Mb PoE Switch
Remotely Power Equipment thru CAT5 Cable up to 100m
Up to 35W per Port
Built-in Surge Protection
Automatic MDI/MDI-X Crossover
Automatic Speed and Duplex Sensing
1K Self Learning MAC Address Table
Compact Size
High Temperature Operation 75°C
Includes DIN rail mounting kit

Description
Specification
Datasheet

The TP-SW5G Power Over Ethernet (POE) 10/100/1000Mb switch offered by Tycon Power Systems is a fully automatic high speed 5 port Ethernet switch with up to 35 Watts of POE power per port. It complies with the IEEE802.3af/at specifications for valid POE device detection.

The unit supplies power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). The Ethernet spec supports distances up to 100m (328 feet) between the POE switch and the remote device.

The switch accepts DC power from the included autoranging 48-56VDC power supply or can be connected to a user supplied 48-56VDC power source. There are 2 power inputs for attachment of primary and backup power sources.

The switch also accepts POE power via the 802.3af/at uplink port (1A MAX).

Ethernet Standard	IEEE802.3/IEEE802.3u
Ports	1 data /P o E input and 4 data/P o E, automatic crossover and polarity
Transmission Speed	1000Mbps / 100 Mbps /10 Mbps Auto - negotiation
Switch Technology	Store and Forward
Protocol	CSMA/CD
Flow Control	IEEE802.3x(full - duplex), Back Pressure(half - duplex)
Data Transmission Rate	1488000pps for 1000baseT, 148800pps for 100baseT, 14880pps for 10baseT
Address Table	1K MAC, self - learning
Connections	Shielded RJ45
POE Output Ports	Port 1 - 4, auto power management Pin assignment: TX(1,2), RX(3,6), V+(4,5), V - (7,8)
Maximum POE Power	1A per port
POE Auto Detection	Passive P o E
POE Protection	Over Temperature, Over Current, Over/Under Voltage
Data Surge Protection	IEC61000 - 4 - 2 (ESD) ±15kV (air), ±8kV (contact) IEC61000 - 4 - 4 (EFT) 40A (5/50ns) IEC61000 - 4 - 5 (Lightning) 20A (8/20μs)
LED’s	Link (Green On), Activity (Green Blinking ) P o E Detect (Yellow On), P o E Detect Error (Yellow Blinking) Power On (Green On), Power On Alarm (Red On)
DC Power Input	12V to 57VDC, Reverse Polarity Protected. NC Accepts P o E power input on Port 5
Self Consumption	< 3 Watts
Operating Temp	- 20 to + 7 5°C ( - 4 to 1 67 °F)
Operating Humidity (RH)	5% - 90% (non condensing)
Storage Temperature	- 55 to + 8 5°C ( - 67 to + 185 °F)
Dimensions (LxWxH)	159 x 118 x 40mm (6.3 x 4.6 x 1.6”)
Weight	318g (11oz)
Warranty	2 Years