|
|
|
TP-SW5G-24 - 5 port High Power POE 10/100/1000BASET switch. IEEE 802.3at/af 48V POE Out, 10-36VDC In
by Tycon Systems
|
|
|
|
- IEEE 802.3af/at High Power 10/100/1000Mb PoE Switch
- Built-in Surge Protection
- Remotely Power Equipment thru CAT5 Cable up to 100m
- Up to 35W per Port, 70W total per switch
- Automatic MDI/MDI-X Crossover
- Automatic Speed and Duplex Sensing
- 1K Self Learning MAC Address Table
- Compact Size
- High Temperature Operation 75°C
- Includes DIN rail mounting kit
|
|
|
The TP-SW5G-24 Power Over Ethernet (PoE) 10/100/1000Mb switch offered by Tycon Power Systems is a fully automatic high speed 5 port Ethernet switch with up to 35 Watts of PoE power per port. It complies with the IEEE802.3af/at specifications for valid PoE device detection. It accepts 10-36VDC power on the wire terminal input and supplies power on 4 ports with 802.3at PoE output. Maximum output power for all ports is 70W.
The unit supplies power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). The Ethernet spec supports distances up to 100m (328 feet) between the PoE switch and the remote device.
The switch accepts DC power from a user supplied 10-36VDC power source. There are 2 power inputs for attachment of primary and backup power sources.
The switch also accepts PoE power via the 802.3af/at uplink port (1A Max).
| Ethernet Standard |
IEEE802.3/IEEE802.3u |
| Ports |
1 data /P o E input and 4 data/P o E, automatic crossover and polarity |
| Transmission Speed |
1000Mbps / 100 Mbps /10 Mbps Auto - negotiation |
| Switch Technology |
Store and Forward |
| Protocol |
CSMA/CD |
| Flow Control |
IEEE802.3x(full - duplex), Back Pressure(half - duplex) |
| Data Transmission Rate |
1488000pps for 1000baseT, 148800pps for 100baseT, 14880pps for 10baseT |
| Address Table |
1K MAC, self - learning |
| Connections |
Shielded RJ45 |
| POE Output Ports |
Port 1 - 4, auto power management Pin assignment: TX(1,2), RX(3,6), V+(4,5), V - (7,8) |
| Maximum POE Power |
Up to 35W per port ; max 70W per 5 port switch |
| POE Auto Detection |
IEEE 802.3af, 802.3at |
| POE Protection |
Over Temperature, Over Current, Over/Under Voltage |
| Data Surge Protection |
IEC61000 - 4 - 2 (ESD) ±15kV (air), ±8kV (contact) IEC61000 - 4 - 4 (EFT) 40A (5/50ns) IEC61000 - 4 - 5 (Lightning) 20A (8/20μs) |
| LED’s |
Link (Green On), Activity (Green Blinking ) P o E Detect (Yellow On), P o E Detect Error (Yellow Blinking) Power On (Green On), Power On Alarm (Red On) |
| DC Power Input |
24VDC (1 2 V to 36V), Dual DC Inputs, Reverse Polarity Protected. Also Accepts P o E power input on Port 5 |
| Self Consumption |
< 4 W atts |
| Operating Temp |
- 20 to + 7 5°C ( - 4 to 1 67 °F) |
| Operating Humidity (RH) |
5% - 90% (non condensing) |
| Storage Temperature |
- 55 to + 8 5°C ( - 67 to + 185 °F) |
| Dimensions (LxWxH) |
159 x 118 x 40mm (6.3 x 4.6 x 1.6”) |
| Weight |
383g (13.5oz) |
| Warranty |
2 Years |
|
|
|
| Frequently Bought Together |
|
|
|
|
