|
|
|
Transmission Mode: Asynchronous, half or full duplex, point-to-point •
Interface: RS-232 9 pin male to 9 pin female • Signals Supported: Transmit Data,
Receive Data • Data Rates: 0 to 115.2K bps • Power Requirements: Port-powered
from RS-232 data and handshake lines • Isolation: 2500V RMS isolation for 1
minute
|
|
|
2 Channel RS232 Optical Isolator
- galvanic signal isolation
- combined Receiver and Transmitter in one case
- communication between DCE and DTE devices
- Data Rate up to 115.2K bps
The RS232 Isolator STD 2.5KV B 9Pin optically isolates both the RS-232 transmit
and receive lines. The isolator has a DB9S female connector on the DTE side and
a DB9P male connector on the DCE side. Typical DTE devices include PCs,
terminals, and printers. Typical DCE devices include modems and multiplexers.
These devices in compliance with the low voltage requirements can be easily
communicate with each other.
| Transmission Mode: |
Asynchronous, half or full duplex, point-to-point |
| Interface: |
RS-232 9Pin plug 9 Pin socket |
| Singals Supported: |
Transmit Data, Receive Data |
| Data Rates: |
0 to 115.2K bps |
| Power Requirements: |
Port-powered from RS-232 data and handshake lines |
| Isolation: |
2500 V RMS isolation for 1 minute |
| Dimensions (L x B x H): |
61 x 33 x 17 mm |
| Standards: |
RoHS; CE; EN 55022; EN 61000-6-1; EN 61000 (-4-2,
-4-3, -4-4, -4-5, -4-6, -4-8, -4-11) |
|
|
|
|
