A52-DB9F w/o Adapter - RS-232/422/485 converter

485 converter with DB9F cable
by MOXA

A52-DB9F w-o Adapter_SUMMARY.html

Automatic Data Direction Control(ADDC)RS-485 data control
Automatic baudrate detection
RS-422 hardware flow control:CTS,RTS signals
LED indicators for power and signal status
RS-485 multidrop operation,up to 32 nodes
2 kV isolation protection(A53)
Built-in 120-ohm termination resistors

Description
Specification
Datasheet

A52-DB9F w-o Adapter_DESCRIPTION.html A52-DB9F w-o Adapter - The A52 and A53 are general RS-232 to RS-422/485 converters designed for users who need to extend RS-232 transmission distance and increase networking capability.

A52-DB9F w-o Adapter.html

Serial Interface
Connector	10-pin RJ45
Flow Control	RTS/CTS
No. of Ports	2
RS-485 Data Direction Control	ADDC (automatic data direction control)
Serial Standards	RS-232 RS-422 RS-485

Serial Signals
RS-232	TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422	Tx+, Tx-, Rx+, Rx-, RTS+, RTS-, CTS+, CTS-, GND
RS-485-4w	Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w	Data+, Data-, GND

Power Parameters
Input Current	170 mA @ 9 VDC
Input Voltage	9 to 30 VDC
No. of Power Inputs	1
Overload Current Protection	Supported
Power Consumption	170 mA @ 9 VDC
Source of Input Power	Power input jack

Physical Characteristics
Housing	Plastic
IP Rating	IP30
Dimensions	90 x 60 x 21 mm (3.54 x 2.36 x 0.83 in)
Weight	85 g (0.19 lb)
Installation	Desktop

Environmental Limits
Operating Temperature	0 to 55C (32 to 131F)
Storage Temperature (package included)	-20 to 75C (-4 to 167F)
Ambient Relative Humidity	5 to 95% (non-condensing)

Standards and Certifications
EMC	EN 55032/35
EMI	CISPR 32, FCC Part 15B Class A
EMS	IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV IEC 61000-4-5 Surge: Power: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF
Environmental Testing	IEC 60068-2-1 IEC 60068-2-14 IEC 60068-2-2 IEC 60068-2-3
Vibration	IEC 60068-2-6