|
|
|
ICP DAS I-7565 - USB to CAN Converter with free software setup utility. Supports Operating Temperatures between -25 to 75C. H
by ICP DAS
|
|
|
|
I-7565_SUMMARY.html
- Features
- RoHs Design
- Fully compliant with USB 1.1/2.0(Full Speed)
- Power over USB: no external power is required
- 20 Mhz Microprocessor inside
- 82C250 CAN transceiver
- Built-in converter firmware
- Transmission speeds up to 1M bps for CAN and 921.6K bps for USB
- Software configurable CAN and USB Communication Parameters
- Maximum transmission distances over 1000m (follow CAN specification)
- Supports both CAN 2.0A and CAN 2.0B
- Built-in jumper to select 120O terminal resister
- Mounts easily on DIN-rail
- Power, data flow and error indicators for CAN and USB
- Has Watchdog inside
- Windows 98/ME/2000/XP drivers supported
- Linux drivers supported
- Free DLL for VC++, VB, and BCB
- I-7565 Utility
- CAN bus Baud rate configuration
- CAN acceptance filter configuration
- CAN2.0A or 2.0B specific selection
- Checksum and Error Response settings
- Easy test to transmit/receive CAN messages
|
|
|
I-7565_DESCRIPTION.html
I-7565 is a cost-efficient device for coupling the CAN-bus to the PC using the standard USB interface. The I-7565 Utility tool can be used to configure the operation conditions between the CAN and USB port communications.
- Receive Buffer: 250 fps
(standard frames per second)
- USB Type B Interface
Connector
- CAN D-Sub, 9-pin Interface
Connector
- Isolation voltage: Over 1000m
Suggested
- Accessories: One USB Type A
to Type B cable
- Dimensions: 123mm x 72mm x
33mm
- Operation Temperature:-25 to
+ 75
- Storage Temperature: -40 to
+80
- Communication speed:
- 921.6K bps fixed for USB
- 1M bps max for CAN
|
|
|
|
