|
|
|
IDS-5011
- Operating Modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
- Multiple host devices : 5 host devices : Virtual COM, TCP Server, TCP Client
mode; 4 IP ranges : UDP
- NAT Pass-Through : the user can manage IDS-5011 through NAT router
- Security : SSL data encryption; secured management by HTTPS and SSH IP Access :
IP White List
- Update DNS Hostname : DDNS
- Event Warning by Syslog, Email, SNMP trap and Beeper
- Configurable by Web-based and Windows utility (DS-Tool)
- Various Windows O.S. supported : Windows NT/ 2000 / XP / 2003 /
VISTA(32/64-bit) / Windows 7 (32/64-bit)
|
|
|
IDS-5011 is an innovative secure 1-port RS-232 to 1-port LAN serial to
Ethernet device server featuring the standard features of device server, such
like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel,
TCP Server, TCP Client, and UDP. In addition, the Windows utility, DS-Tool,
could configure multiple devices and set up the mappings of Virtual Com. The
features of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for
administrators to configure ORing’s device servers through NAT router from
different IP domains or Internet via modem remotely. On the other hand, IDS-5011
can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet
connection breakdown or any host PC fails. Further, IDS-5011 features HTTPS, SSH,
and SSL encryption to assure the security of critical data transmission.
IDS-5011 provides dual redundant power inputs, 12~48 VDC and DC power jack to
guarantee a non-stop operation. With wide operating temperature, -40°~70°C , and
rugged IP-30 housing design, IDS-5011 could operate in the harsh industrial
environment. Therefore IDS-5011 is the best solution to the high demand of
secure serial to Ethernet critical data communication.
| Serial Ports |
|
| Connector |
DB9 x 1 |
| Operation Mode |
RS232 |
| Serial Baud Rate |
110bps to 460.8kbps |
| Data Bit |
5, 6, 7, 8 |
| Stop Bit |
1, 1.5, 2 |
| Parity |
None, Even, Odd, Space, Mark |
| Flow Control |
XON/XOFF, RTS/CTS, DTR/DSR |
| Network Features |
|
| Network Protocols |
ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP,
PPPoE, DDNS |
| LED Indicators |
|
| Power Indicator |
PWR 1(2) / Ready :
Red On : Power is on and booting up.
Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not
respond properly.
Green On : Power is on and functioning Normally.
Green Blinking : Located by Administrator. |
| 10/100Base-T(X) RJ45 Port Indicator |
Green for port Link/Act at 100Mbps. Amber for port Link/Act at
10Mbps. |
| Serial TX / RX LEDs |
Red : Serial port is receiving data
Green : Serial port is transmitting data |
| Power |
|
| Redundant Input Power |
Dual DC inputs. 12~48VDC on 3-pin terminal block and power jack |
| Power Consumption (Typ.) |
4 watts |
| Overload Current Protection |
Present |
| Reverse Polarity Protection |
Present on terminal block |
| Physical Characteristics |
|
| Enclosure |
IP-30 |
| Dimensions (W x D x H) |
72(W)x29.4(D)x123.4(H) mm (2.83x1.16x4.86 inch.) |
| Weight (g) |
346g |
| Environmental |
|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Operating Temperature |
-40 to 70°C (-40 to 158°F) |
| Operating Humidity |
5% to 95% Non-condensin |
| Regulatory Approvals |
|
| EMI |
FCC Part 15, CISPR (EN55022) class A, |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5
(Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| Warranty |
5 years |
|
|
