MGate 5217I-600-T of the MGate 5217I Series comprise 2-port BACnet gateways that can convert Modbus RTU/ACSII/TCP to BACnet/IP protocol. Depending on the size and the scale of the network, the gateways provide 600-point and 1200-point models. All models are rugged, DIN-rail mountable, operate in wide temperatures, and offer built-in 2kV isolation for serial signals.
Easy Configuration Via Web Console and Excel Spreadsheet
The MGate 5217I Series comes with an intuitive UI design to make configuration easy. With that, you can easily access protocol conversion modes and finish the configuration in a few steps instead of installing an additional engineering utility in your computer. Besides, the MGate can generate Modbus commands by importing an Excel spreadsheet, which makes it easy to edit Modbus commands.
Modbus and BACnet/IP Protocol Traffic Monitor and Diagnostics
The MGate 5217I gateways support Modbus and BACnet/IP Protocol Traffic Monitor and Diagnostics for easy troubleshooting, especially during the installation stage. Communication issues could be caused by incorrect software parameters, such as the wrong slave ID and register address, or an incorrect command configuration. With Diagnostics, you can check the communication status and view values at a glance. With Modbus/BACnet Protocol Traffic Monitor, you can check the captured data and easily identify the root cause.
Security Features Based on IEC 62443
Using network devices that are IEC 62443-4-2 compliant and equipped with basic security capabilities is an effective precautionary measure to ward off cyberattacks. The MGate 5217I Series is capable of several basic security capabilities, including password cracking defense, sniffer and data breach prevention, whitelisting, and the account management.
Ethernet Interface
Ethernet Software Features
-
Industrial Protocols
Modbus TCP Client (Master), BACnet/IP Server (Slave)
-
Configuration Options
Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console
-
Management
ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, UDP, NTP Client
-
MIB
RFC1213, RFC1317
-
Time Management
NTP Client
Serial Interface
-
No. of Ports
2
-
Connector
DB9 male
-
Serial Standards
RS-232/422/485
-
Baudrate
50 bps to 921.6 kbps
-
Data Bits
7, 8
-
Parity
None, Even, Odd, Space, Mark
-
Stop Bits
1, 2
-
Flow Control
RTS Toggle (RS-232 only), RTS/CTS, DTR/DSR
-
RS-485 Data Direction Control
ADDC® (automatic data direction control)
-
Pull High/Low Resistor for RS-485
1 kilo-ohm, 150 kilo-ohms
-
Terminator for RS-485
120 ohms
-
Isolation
2 kV (built-in)
Serial Signals
-
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
-
RS-422
Tx+, Tx-, Rx+, Rx-, GND
-
RS-485-2w
Data+, Data-, GND
-
RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND
Serial Software Features
-
Industrial Protocols
Modbus RTU/ASCII Master
Modbus RTU/ASCII
Modbus TCP
BACnet/IP
-
Mode
Server (Slave)
-
Memory Size
MGate 5217I-600-T: 600 points
MGate 5217I-1200-T: 1200 points
-
Supported BACnet Object
Binary Input
Binary Output
Binary Value
Analog Input
Analog Output
Analog Value
Multi-state Input
Multi-state Output
Multi-state Value
Integer Value
Positive Integer Value
Power Parameters
Relays
Physical Characteristics
Environmental Limits
-
Operating Temperature
-40 to 75°C (-40 to 167°F)
-
Storage Temperature (package included)
-40 to 85°C (-40 to 185°F)
-
Ambient Relative Humidity
5 to 95% (non-condensing)
Standards and Certifications
-
EMC
EN 55032/35
-
EMI
CISPR 32, FCC Part 15B Class A
-
EMS
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs
-
Safety
UL 62368-1, IEC 62368-1
-
Freefall
IEC 60068-2-32
-
Shock
IEC 60068-2-27
-
Vibration
IEC 60068-2-6, IEC 60068-2-64
MTBF
-
Time
1,277,500 hrs
-
Standards
Telcordia SR332
|
