|
|
- Link any serial device to an IEEE 802.11a/b/g/n network
- Supports 802.11n MIMO 2T2R
- WLAN transmission rates up to 300 Mbps
- Supports secure access with WEP, WPA/WPA2-Personal, WPA/WPA2- Enterprise
- Provides COM port redirection, TCP, UDP, and pair connection modes
- Supports up to 921.6 kbps and any baud rate setting
- Provides web-based configuration and Windows utility
- Allows a maximum of five hosts to access one serial port
- Modbus TCP and Modbus RTU support
- Selective dual band 2.4 or 5 GHz
Mfg SKU # : | EKI-1361-MB-BE |
|
|
|
The EKI-1361-MB and EKI-1362-MB wireless serial device servers bring RS-232/422/485 to wireless LAN. They allow nearly any device with a serial port to connect and share a wireless LAN. The EKI-1361 and EKI-1362 provide a quick, simple, and cost-effective way to bring remote management and data accessibility to thousands of devices that cannot otherwise connect to a network. With the EKI-1361 and EKI-1362, your existing serial devices can be used with the most common operating systems without the need to write special drivers. Moreover, you can make serial devices communicate directly with other devices peer-to-peer, thus eliminating the need for intermediate host PCs and software programming. This saves a considerable amount of cost and effort. Additionally, you can actively request data or issue commands from the RS-232/422/485 side or wireless LAN side with bilateral data transmission. Thus, the EKI-1361 and EKI-1362 are especially suitable for remote monitoring environments such as security systems, factory automation, SCADA, transportation, and more.
Ethernet Communication |
Port Type |
RJ45 |
Number of Ports |
1 |
Speed |
10/100/1000 |
Wireless LAN Communications |
Compatibility |
IEEE 802.11a/b/g/n |
Speed |
Up to 300Mbps |
Network Mode |
Infrastructure |
Antenna Connector |
Reverse SMA |
No. of Antenna |
2 (supports 2T2R) |
Free Space Range |
Open space 100 m |
Wireless Security |
WEP, WPA/WPA2-Personal, WPA/WPA2-Enterprise |
Serial Communications |
Port Type |
RS-232/422/485, software-selectable |
No. of Ports |
EKI-1361: 1
EKI-1362: 2 |
Port Connector |
DB9 male |
Data Bits |
5, 6, 7, 8 |
Stop Bits |
1, 1.5, 2 |
Parity |
None, Odd, Even, Space, Mark |
Flow Control |
XON/XOFF, RTS/CTS |
Baud Rate |
50 bps ~ 921.6 kbps, any baud rate setting |
Serial Signals |
RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485: Data+, Data-, GND |
Protection |
15 KV ESD for all signals |
Software |
OS Support |
32-bit/64-bit Windows XP/Vista/7/8/8.1/10, Windows Server 2003/2008/2008 R2/2012/2012 R2 and Linux |
Utility Software |
Advantech EKI Device Configuration Utility |
Operation Modes |
Access Point mode/Station mode Pair connection without AP (peer to peer) mode
EKI-1361/2
COM port redirection mode (Virtual COM) TCP/UDP server (polling) mode TCP/UDP client (event handling) mode
EKI-1361/2-MB
Modbus RTU Master/Slave Modbus ASCII Master/Slave |
Configuration |
Windows utility, Telnet console, Web Browser |
Protocol |
ARP, ICMP, IPv4, IPv6, TCP, UDP, BOOTP, DHCP Client, Auto IP, Telnet, DNS, SNMP, HTTP, SMTP, SNTP |
General |
LED Indicators |
System: Power, System Status
WLAN: Quality, Link/Active
LAN: Link/ Active
Serial: Tx, Rx |
Rebook Trigger |
Built-in WDT (watchdog timer) |
Mechanics |
Dimensions (WxHxD) |
28.5 x 120 x 85.3 mm (1.12" x 4.72" x 3.36") |
Enclosure |
Metal with solid mounting hardware |
Mounting |
DIN-rail, Wall |
Weight |
0.5 Kg |
Power Requirements |
Power Input |
12 ~ 48 VDC, redundant dual inputs |
Power Connector |
Terminal block |
Power Consumption |
EKI-1361: 8W
KI-1362: 9W |
Environment |
Operating Temperature |
-30 ~ 65 °C (-22 ~ 149 °F) |
Storage Temperature |
-40 ~ 80 °C (-40 ~ 176 °F) |
Operating Humidity |
10 ~ 95% RH |
Regulatory Approvals |
EMC |
CE, FCC Part 15 Subpart B (Class A) |
|
|