| JBOD Connection Interface |
SAS |
| Drive Bay |
16 x 3.5-inch
|
| Drive Compatibility |
3.5-inch bays:
3.5-inch SAS 12Gb/s, 6Gb/s hard disk drives
3.5-inch SATA 6Gb/s,
3Gb/s hard disk drives
2.5-inch SATA 6Gb/s, 3Gb/s solid state drives You can
only use one disk type (HDD or SSD) in a RAID group. Combining different types of disk in one RAID
group is not supported.
|
| Hot-swappable |
|
| Form Factor |
3U Short Depth Rackmount |
| Host Interface |
4 x 12Gb/s SAS 3.0 wide ports (4-wide port) Mini-SAS HD (SFF-8644) |
| LED Indicators |
Front panel: HDD 1-16, Power, Status, Link, Fan error
Rear panel: SAS connector,
Enclosure ID |
| Buttons |
Power |
| Dimensions (HxWxD) |
5.17 x 18.98 x 16.74 inch Excludes ear hook and the protruding part
of the Power Supply Unit.
|
| Weight (Net) |
28.97 lbs |
| Weight (Gross) |
37.04 lbs |
| Operating Temperature |
0 - 40 °C (32°F - 104°F) |
| Storage Temperature |
-20 - 70°C (-4°F - 158°F) |
| Relative Humidity |
5-95% RH non-condensing, wet bulb: 27°C (80.6°F) |
| Power Supply Unit |
550W(x2), 100-240V |
| Power Consumption: Operating Mode, Typical |
207.13 W Tested with drives fully populated.
|
| Fan |
3 x 80mm, 12VDC |
| System Warning |
Buzzer |
| QTS / QuTS hero |
|
| Windows |
|
| Supports JBOD cascading |
|
| Supports expanding NAS storage pools |
|
| Supports Multi-path |
|
| Management |
Managed via QNAP QTS / QuTS hero OS
1. Supports disk S.M.A.R.T. information
2.
RAID expansion enclosure identifier
3. Locate RAID expansion enclosures
4. Locate hard disks on
RAID expansion enclosure
5. Smart fan control by detecting system and hard drive temperature
6.
In-band SAS firmware update |
