|
|
|
MDC-211-WF - Wi-Fi Modbus Data Concentrator with 1 x Ethernet, 1 x RS-232 and 1 x RS-485
by ICP DAS
|
|
|
|
- Compatible with IEEE 802.11 a/b/g/n standards
- Support Infrastructure and Limit-AP mode
- Support WPA-PSK, WPA2-PSK for Wi-Fi encryption
- Support Ethernet, RS-232/485 and Wi-Fi interfaces
- Support Web-based UI Operations
- Support the Modbus TCP/RTU protocol
- Support 240 Modbus Polling Commands
- Supports 9600 Modbus Registers for DI/DO/AI/AO
|
|
|
MDC-211-WF Modbus data concentrator developed by ICP DAS, with Ethernet, WiFi Wireless, RS-232 and RS-485 communication interfaces, can link the Modbus RTU devices to the Ethernet network. MDC-211-WF can read the data of Modbus RTU device according to the user-defined command table, and integrate the data of different Modbus RTU devices into the format of the continuous address so that the remote monitor host can connect to MDC-211-WF from Ethernet to access the data of multiple Modbus RTU devices at once.
| Wi-Fi |
| Standards |
IEEE 802.11a/b/g/n |
| Protocol |
Modbus TCP Slave |
| Mode |
Limit-AP/Infrastructure |
| Frequency |
2.4 GHz
5 GHz |
| Encryption |
Open/WEP/WPA/WPA2 |
| Channels |
2.4 GHz: CH1~11
5 GHz: CH36, 40, 44, 48 |
| Antenna |
Omni-Directional
3 dBi @2.4 GHz / 5.5 dBi @ 5 GHz |
| COM Ports |
| Ports |
1 x RS-232 1 x RS-485 |
| Baud Rate |
1200 ~ 115200 bps |
| Protocol |
Modbus RTU Master/ Slave |
| Polling Definition |
Up to 240 Modbus command definitions for all Wi-Fi/RS-232/ RS-485 ports |
| Ethernet |
| Ports |
1 x RJ-45, 10/100Base-T(X) |
| Protocol |
Modbus TCP Slave |
| Configuration |
Web-based User Interface |
| Power |
| Input Range |
+10 VDC ~ +30 VDC |
| Mechanical |
| Casing |
Metal |
| Dimensions (mm) |
52 x 98 x 27 (W x L x H) |
| Installation |
DIN-Rail |
| Environmental |
| Operating Temperature |
-25 ~ +75°C |
| Storage Temperature |
-40 ~ +85°C |
| Humidity |
10 ~ 95% RH, Non-condensing |
|
|
