UC-8210 DIN-rail Mounting Kit_DESCRIPTION.html
UC-8210 DIN-rail Mounting Kit - The UC-8200 computing platform is designed for embedded data acquisition applications. The computer comes with dual RS-232/422/485 serial ports, dual 10/100/1000 Mbps Ethernet ports, and one CAN port as well as dual Mini PCIe socket to support Wi-Fi/cellular modules. These versatile capabilities let users efficiently adapt the UC-8200 to a variety of complex communications solutions. The UC-8200 is built around a Cortex-A7 dual core processor that has been optimized for use in energy monitoring systems, but is widely applicable to a variety of industrial solutions. With flexible interfacing options, this tiny embedded computer is a reliable and secure gateway for data acquisition and processing at field sites as well as a useful communications platform for many other large-scale deployments. Wide temperature LTE-enabled models are available for extended temperature applications. All units are thoroughly tested in a testing chamber, guaranteeing that the LTE-enabled computing platforms are suitable for wide-temperature applications.
UC-8210 DIN-rail Mounting Kit.html
| Computer |
| CPU |
- Armv7 Cortex-A7 dual-core 1 GHz
|
| DRAM |
|
| Supported OS |
- Moxa Industrial Linux 1 (Debian 9, kernel 4.4), 2027 EOL
Moxa Industrial Linux 3 MIL3 OS is selectable via Moxa Computer Configuration
System (CCS) for CTO models. For the model names, see the Ordering Information section
of the datasheet PDF file. (Debian 11, kernel 5.10), 2031 EOL
See
www.moxa.com/MIL
|
| Storage Pre-installed |
|
| Expansion Slots |
- MicroSD (SD 3.0) socket x 1
|
| Computer Interface |
| Ethernet Ports |
- Auto-sensing 10/100/1000 Mbps ports (RJ45 connector) x 2
|
| Serial Ports |
- RS-232/422/485 ports x 2, software selectable (DB9 male)
|
| CAN Ports |
- CAN 2.0 A/B x 1 (DB9 male)
|
| Digital Input |
|
| Digital Output |
|
| USB 2.0 |
- USB 2.0 hosts x 1, type-A connectors
|
| Buttons |
|
| TPM |
|
| Security Functions |
| Hardware-based Security |
- TPM 2.0
Hardware Root of Trust Secure Boot
|
| Intrusion Detection |
- Host-based Intrusion Detection
|
| Security Tools |
- Security Diagnostic Tool
Security Event Auditing
Secure Update
|
| Disk Protection |
|
| Recovery |
- One-step recovery to the last known secure state
Dual-system design with automatic failback
|
| Reliability |
- Network Keep Alive
Network Failover and Failback
|
| Serial Interface |
| Baudrate |
|
| Data Bits |
|
| Stop Bits |
|
| Parity |
- None, Even, Odd, Space, Mark
|
| Flow Control |
- RTS/CTS, XON/XOFF
ADDC (automatic data direction control) for RS-485
RTS Toggle (RS-232
only)
|
| Console Port |
- 1 x 4-pin header to DB9 console port
|
| Serial Signals |
| RS-232 |
- TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
|
| RS-422 |
|
| RS-485-2w |
|
| CAN Interface |
| No. of Ports |
|
| Connector |
|
| Baudrate |
|
| Industrial Protocols |
|
| Isolation |
|
| Signals |
- CAN_H, CAN_L, CAN_GND, CAN_SHLD, CAN_V+, GND
|
| Digital Inputs |
| Connector |
- Screw-fastened Euroblock terminal
|
| Dry Contact |
- Off: open
On: short to GND
|
| Isolation |
|
| Sensor Type |
- Wet contact (NPN)
Dry contact
|
| Wet Contact (DI to COM) |
- On: 10 to 30 VDC
Off: 0 to 3 VDC
|
| GPS Interface |
| Receiver Types |
- GPS/GLONASS/Galileo
State-of-the-art GNSS solution
|
| Accuracy |
|
| Acquisition |
- Hot starts: 1.1 sec
Cold starts: 29.94 sec
|
| Sensitivity |
- Cold starts: -145 dBm
Tracking: -160 dBm
|
| Time Pulse |
|
| Power Parameters |
| No. of Power Inputs |
|
| Input Voltage |
|
| Power Consumption |
|
| Input Current |
|
| Environmental Limits |
| Operating Temperature |
|
| Storage Temperature (package included) |
|
| Ambient Relative Humidity |
- 5 to 95% (non-condensing)
|
| Shock |
|
| Vibration |
- 2 Grms @ IEC 60068-2-64, random wave, 5-500 Hz, 1 hr per axis (without USB devices attached)
|
| Standards and Certifications |
| EMC |
- EN 55032/35
EN 61000-6-2/-6-4
|
| EMI |
- CISPR 32, FCC Part 15B Class A
|
| EMS |
- IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
PFMF
IEC 61000-4-5 Surge: Power: 0.5 kV; Signal: 1 kV
|
| Industrial Cybersecurity |
- IEC 62443-4-1
IEC 62443-4-2
|
| Hazardous Locations |
- Class I Division 2
ATEX
IECEx
|
| Carrier Approvals |
|
| Safety |
|
| Green Product |
|
|
