UPS-PL2424-36 - UPSPro, 60W 430VA Polycarbonate Enclosure, 36Ah Batt, 24V PoE, Solar Ready. 24hr backup @ 9W
by Tycon Systems

The UPS-PL2424-36 is designed for applications that require a backup power source in order to maintain uninterrupted service in the event of AC power failure. The system is powered over a CAT5/6 network cable via Power over Ethernet (PoE) using a Power Supply and PoE Inserter (included). Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid AGM batteries. Enclosures have multiple ports for CAT5/6 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas.

There is some space inside the enclosures for customer electronics such as controllers, wireless AP or CPE cards, sensors, inverters, etc. Equipment runs on battery power which isolates it from power line surges which is the main cause of outdoor equipment failure.

Models are equipped with a Solar Ready controller so they can also be powered using solar panels in addition to or instead of the Power Supply and PoE Inserter.

A typical 250mW wireless access point with average power consumption of 3.5W will run 24 hours on a 8.5Ah battery at room temperature or 16 hours at -20 deg C.

	UPS-DC12xx	UPS-PL12xx	UPS-PL24xx
POE Output Voltages Available (DC)	24V, 48V		24V and 48V
Available Capacities (Amp Hours)	8.5Ah	17Ah, 34Ah	8.5Ah, 17Ah
Total Output Power	30W	30W	60W
Maximum POE Input Voltage	57V
Battery Voltage (DC)	12V		24V
Battery Type	Valve Regulated Sealed Lead Acid / Absorbent Glass Mat (AGM)
Battery Life	5 Years
Controller Type	Dual Input Solar/POE, PWM, 12V 10A Max Solar Panel Size 135W		Dual Input Solar/POE, PWM, 24V 10A Max Solar Panel Size 270W
Overcharge Protection	14.4V		28.6V
Over-discharge protection	11.0V		22.0V
Over-discharge recovery voltage	12.0V		24.0V
Controller Self Consumption	<0.5W
Charging POE Power Supply	120/220VAC In ; 24-36VDC 90W min Out		120/220VAC In ; 36-48VDC 90W Min Out
Enclosure Type	Die Cast Aluminum	Polycarbonate
Enclosure External Size	11 x 8.5 x 3.5” (279 x 216 x 89mm)	17.5 x 12.5 x 6” (445 x 318 x 152mm)
Enclosure Internal Size	10 x 7.75 x 3” (254 x 197 x 76mm)	14 x 10 x 5” (356 x 254 x 127mm)
Space available for Customer Electronics	7.75 x 5 x 1.25” (197 x 127 x 32mm)	3 x 5 x 3” (76 x 127 x 76mm)
Operating Temperature	-30°C to +60°C (-22°F to 140°F)
System Weight (without batteries)	4lb (1.8kg)
Battery Weight (each)	5.5lb (2.5kg)

UPS-PL2424-36.pdf

392 K