Patton CL1151E/PAFA/BNC/EUI-2PK – CopperLink Industrial Dante and PoE+ Ethernet Extender Kit (Local and Remote); BNC; 1 x 10/1
by PATTON

The CL1151E-PAFA-BNC-EUI-2PK - Demand for IP/Ethernet-connected devices in the Audio Video space is growing rapidly. Power-over-Ethernet (PoE) in particular - has grown in popularity because it strikes the perfect blend of speed, cost, and ease of use.

Ethernet, however, presents a few drawbacks that may overshadow the benefits by creating escalating infrastructure costs and system downtime. The Ethernet standard specifies a distance limitation of 328 ft (100 m), which restricts location options for device installation. Standard Ethernet also requires Cat 5 cabling or better, which often leads to installing new cabling infrastructure - involving tearing into walls, ceilings, pavement, and worse.

The CopperLink 1151E kit from Patton enables Ethernet connectivity of your Dante enabled devices over previously installed copper infrastructure, such as existing speaker, alarm cables even CCTV coaxial cable.

Instantaneously install your 10/100BaseTx Dante enabled speakers, I/O converters and more - with no additional overhead cost. With the extended reach the CL1151E kit provides, you can install your IP Audio Video and teleconferencing equipment exactly where you want it!

Ethernet, however, presents a few drawbacks that may overshadow the benefits by creating escalating infrastructure costs and system downtime. The Ethernet standard specifies a distance limitation of 328 ft (100 m), which restricts location options for device installation. Standard Ethernet also requires Cat 5 cabling or better, which often leads to installing new cabling infrastructure - involving tearing into walls, ceilings, pavement, and worse.

The CopperLink 1151E kit from Patton enables Ethernet connectivity of your Dante enabled devices over previously installed copper infrastructure, such as existing speaker, alarm cables even CCTV coaxial cable.

Instantaneously install your 10/100BaseTx Dante enabled speakers, I/O converters and more - with no additional overhead cost. With the extended reach the CL1151E kit provides, you can install your IP Audio Video and teleconferencing equipment exactly where you want it!

Line Interfaces (Data)	1 x RJ45 or BNC (Coax) Supports 1-4 pairs
Ethernet Interfaces	1 x RJ45 Auto-Sensing 10/100Base-Tx with full or half-duplex operation
LEDs	Power, Line, (10 or 100 operation), Eth, and PoE
Protocol	Transparent to high layer AES67/AVB/TSN Ethernet protocols. Supports 802.1Q VLAN tagged frames Transparent to IP video schemes Fully transparent to compression schemes such as WMV, MPEG-4, and MJPEG
Overvoltage Protection (Line and Ethernet)	IEC 61000-4-2 (ESD) 25kV (air), 15kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) IEC 61000-4-5 (lightning) 25A (8/20μs)
Power Injection (PSE only)	DC voltage on Ethernet port 54 VDC
Power Consumption	1.5 W
Power Supply	External AC Adapter 100-240 VAC to 54 VDC Input: 30-57 VDC (Recommended 54 VDC)
MTBF	83,043 hours
Environment	Temperature: -10 to 70°C Humidity: 10 to 95% (non-condensing)
Physical	1.19 W x 4.28 H x 3.36 D in. (30.2 W x 108.7 H x 85.3 D mm) 0.78 oz (22 g)
Compliance	FCC Part 15A, Class B CE Mark EMC Directive 89/336/EEC LVD Directive 73/23/EEC

CL1151E_PAFA_BNC_EUI_2PK.pdf

1,187 K