|
|
|
IDS-5042-WG/IWG
- High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed
- Operating Modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
- Redundant multiple host devices :
- 5 host devices : Virtual COM, TCP Server, TCP Client mode
- 4 IP ranges : UDP
- NAT Pass-Through : the user can manage IDS-5042-WG/IDS-5042-IWG through NAT
router
- Security : SSL data encryption ; secured management by HTTPS and SSHIP Access
IP White List
- Internet Communication : PPPoE authentication
- Update DNS Hostname : DDNS
- Dual redundant Ethernet port support redundant mode(Recovery time < 10ms)
- Ethernet switch mode enable Daisy Chain
- Event Warning by Syslog, Email, SNMP trap, and Beeper
- Configurable by Web-based and Windows utility (DS-Tool)
- Various Windows O.S. supported :
Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/Windows 7(32/64bit)
|
|
|
IDS-5042-WG is an innovative secure 4-port RS232/422/485 (IDS-5042-IWG is
with 4-port RS-422/485 on 5-pin terminal block) to 802.11b/g WLAN, up to 54Mbps,
and 2 port LAN device server featuring the standard features of device server,
such like TCP/IP interface and versatile operation modes: Virtual Com, Serial
Tunnel, TCP Server, TCP Client, UDP. In addition, the Windows utility, DS-Tool,
could configure multiple devices and set up the mappings of Virtual Com. The
features of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for
administrators to configure ORing’s device servers through NAT router from
different IP domains or Internet via modem remotely. On the other hand,
IDS-5042-WG and IDS-5042-IWG can simultaneously transfer data up to 5 redundant
host PCs to aovid Ethernet connection breakdown or any host PC fails. Further,
IDS-5042-WG and IDS-5042-IWG feature HTTPS, SSH, SSL encryption, and 802.1X to
assure the security of critical data transmission.
IDS-5042-WG and IDS-5042-IWG provide dual redundant power inputs, 12~48 VDC,
on terminal block to guarantee a non-stop operation. With wide operating
temperature, -10~70°C, and rugged IP-30 housing design, IDS-5042-WG and
IDS-5042-IWG could operate in the harsh industrial environment. Therefore,
IDS-5011-WG is the best solution to the high demand of secure serial to WLAN
critical data communication.
| Physical Ports |
|
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX |
2 |
| |
|
| |
|
| WLAN Feature |
|
| Operating Mode |
Client mode |
| Antenna and Connector |
2dBi antenna on reversed SMA connector |
| Radio Frequency Type |
DSSS, OFDM |
| Modulation |
IEEE802.11b : CCK, DQPSK, DBPSK
IEEE802.11g : OFDM with BPSK, QPSK, 16QAM, 64QAM |
| Frequency Band |
America/FCC : 2.412~2.462 GHz (11 channels)
Europe CE/ETSI : 2.412~2.472 GHz (13 channels) |
| Transmission Rate |
IEEE802.11b : 1/ 2/ 5.5/ 11 Mbps
IEEE802.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps |
| Transmit Power |
IEEE802.11b/g : 18dBm |
| Receiver Sensitivity |
-81dBm @ 11Mbps, PER< 8%;
-64dBm @ 54Mbps, PER< 10% |
| Encryption Security |
WEP : (64-bit ,128-bit key supported)
WPA /WPA2 : IEEE802.11i(WEP and AES encryption)
WPA-PSK (256-bit key pre-shared key supported)
TKIP encryption 802.1x Authentication supported |
| Serial Ports |
|
| Connector |
5-pin terminal block x 4 |
| Operation Mode |
RS-422 / 4(2)-Wire RS-485. Which can be configured by
DS-Tool |
| Serial Baud Rate |
110 bps to 460.8 Kbps |
| Data Bits |
5, 6, 7, 8 |
| Parity |
odd, even, none, mark, space |
| Stop Bits |
1, 1.5, 2 |
| RS-232 |
TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND |
| RS-422 |
Tx+,Tx-, Rx+, Rx-,GND |
| RS-485 (4-wire) |
Tx+,Tx-, Rx+, Rx-,GND |
| RS-485 (2-wire) |
Data+, Data-,GND |
| RS-485 (2-wire) |
Data+, Data-,GND |
| Isolation |
2 KV |
| Flow Control |
XON/XOFF |
| Network Features |
|
| Network Protocols |
ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP,
SSL, PPPoE, DDNS |
| LED
Indicators |
|
| Power Indicator |
PWR 1(2) / Ready :
Red On : Power is on and booting up
Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not
respond properly
Green On : Power is on and functioning Normally
Green Blinking : Located by Administrator |
| 10/100Base-T(X) RJ45 Port Indicator |
Green for port Link/Act at 100Mbps.
Amber for port Link/Act at 10Mbps. |
| WLAN Indicator |
WLAN Link /ACT : Green
WLAN Strength : 1<25%, 2<50%, 3<75%, 4<100% |
| Serial TX / RX LEDs |
Red : Serial port is receiving data
Green : Serial port is transmitting data |
| Power |
|
| Redundant Input Power |
Dual 12~48VDC on 6-pin terminal block |
| Power Consumption (Typ.) |
6.5 watts |
| Overload Current Protection |
Present |
| Reverse Polarity Protection |
Present |
| Physical Characteristics |
|
| Enclosure |
IP-30 |
| Dimensions (W x D x H) |
52(W) x 106.1(D) x 144.3(H) mm (2.05x4.18x5.68 inch.) |
| Weight (g) |
675 g |
| Environmental |
|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Operating Temperature |
-10 to 70°C (14 to 158°F) |
| Operating Humidity |
5% to 95% Non-condensing |
| Regulatory Approvals |
|
| EMI |
FCC Part 15, CISPR (EN55022) class A, |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5
(Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| Safety |
EN60950-1 |
| Warranty |
3 years |
|
|
