855-12906 - ** DISCONTINUED ** McPC-Gigabit, TX/SSLX -SM1310/PLUS-SC
by IMC

Your network is growing and many new access points, workstations, etc. are required. However, legacy equipment, along with your existing wiring infrastructure, must work with any new equipment you implement in your network. When copper-to-fiber conversions are required, along with advanced troubleshooting features, our MediaConverter Series is the perfect solution.

MediaConverter Series enables you to easily and cost-effectively connect one type of media to other dissimilar media or networking products. This series increases the functionality and extends the productive life of both your legacy cabling infrastructure and networking equipment when adding fiber to your network.

• Save money by keeping existing copper network card (NIC) and converting inside the PC
• No drivers to install; McPC mounts inside any PC or workstation with a standard PCI or ISA slot
• Includes a standard 4-pin peripheral power connector
• AutoCross or push-button selectable MDI/MDIX, depending on the unit
• 50/125µm or 62.5/125µm multi-mode fiber
• Includes status LEDs
• RoHS-Compliant
• Plug-and-play operation

• 1000 Mbps twisted pair to fiber media conversion
• IEEE 802.3ab 1000Base-T twisted pair
• IEEE 802.3z 1000Base-LX or SX fiber
• Optionally available for single-strand fiber

Connectors

• Single-mode, Single-Strand LX 1310nm, SC connector
• 40km range
• Supports Half- and Full-Duplex operation

• PCI Slot Configurations
• Shipping Weight 0.6 lbs (0.22 kg)

• Operating Temperature +32° to +122° F (0° to +50° C)
• Storage Temperature: -4° to +158° F (-20° to +70° C)
• Operating Humidity 5% to 95% (non-condensing)

• FCC Class B
• UL/cUL, CSA, CE