|
|
|
855-12844 - ** DISCONTINUED ** MCPIM, TP/FO-SM1310/ PLUS-ST
by IMC
|
|
|
|
- Modular, hot-swappable architecture reduces operational costs
- associated with product installations, upgrades and maintenance
- One 10 Mbps twisted pair port with and RJ45 connector
- One 10 Mbps fiber port with ST and SC connectors
- Plug-and-play operation
|
|
|
Your network is growing and many new access points, workstations, etc. are
required. However, legacy equipment, along with your existing wiring
infrastructure, must work with any new equipment you implement in your network.
When copper-to-fiber, copper-tocoax or fiber-to-fiber conversions are required,
along with advanced troubleshooting features, our MediaConverter Series is the
perfect solution.
MediaConverter Series enables you to easily and cost-effectively connect one
type of media to other dissimilar media or networking products. This series
increases the functionality and extends the productive life of both your legacy
cabling infrastructure and networking equipment when adding fiber to your
network.
Technical
-
Install in any MediaConverter chassis
-
50/125µm or 62.5/125µm multi-mode fiber
-
9/125µm single-mode fiber
-
Include diagnostic LEDs
-
Include hot-swappable architecture
-
10Base-T twisted pair
-
10Base-FL fiber
-
Includes MDI/MDIX switch
-
Features LinkLoss and FiberAlert
Connectors
-
Single-mode, 1310nm, ST connector
-
40km range
-
Supports Half- and Full-Duplex operation
Mechanical
-
Dimensions 0.75”H x 2.50”W x 4”D (2.20 x 6.41 x 10.25 cm)
-
Shipping Weight 0.7 lbs. (0.3 kg)
Environmental
-
Operating Temperature +32° to +122° F (0° to +50° C)
-
Storage Temperature: -13° to +158°F (-25° to +70° C)
-
Operating Humidity 5% to 95% (non-condensing)
Regulatory Approvals
-
FCC Class B
-
UL/cUL, CSA, CE
|
|
|
|
