|
|
SL4022/EUI - SmartLink 2 FXS VoIP GW-Router, 2x 10/100bTX, External UI Power. by PATTON
|
|
|
- Two FXS Connections—Up to 2 FXS ports connect to a standard phone or PBX.
- QoS Guaranteed—Quality of Service ensures voice traffic gets priority without shutting down your Ethernet LAN.
- Firewall, NAT, DHCP, PPPoE—Connect to any broadband access provider, serve the whole network, and secure your data. User configurable IP services ensure every host is connected to the LAN.
- SIP Signaling—Deploy into any multimedia, interactive, or softswitch network with the leading call and session signaling protocols.
- Toll Quality CODECs & T.38 Fax—Wall-mount ready and an optional DIN rail mounting kit is available.
- Centralized Management—HTTP/SNMP manageable from any location.
|
|
|
The Patton Model SL4022-EUI provides two RJ-45 Ethernet ports and two FXS (RJ-11) analog phone ports. Front panel LEDs quickly show at-a-glance the status of the system, LAN, WAN, and phone ports. A full suite of IP features (DHCP, NAT/PAT, and NTP) are available to LAN devices attached downstream. VLAN tagging and prioritization enables voice traffic to be handled before data traffic. Support for PPPoE simplifies extending corporate intranet services to remote telecommuters.
The web interface offers two levels of configuration access for the network operator and end user. The friendly web interface and product labeling (Phone, LAN, WAN etc.) to help ensure a trouble-free installation for the end user. Configuration and firmware can be downloaded from a TFTP server.
The SmartLink is SIP standard compliant, so it can be used with most SIP-based telephony services. Analog phones attached to the SmartLink can use such advanced voice calling features as call forwarding, caller ID, 3-way calling, call holding, call retrieval and call transfer.
Voice Connectivity |
2-wire loopstart, RJ-11/12 • short haul loop 1.1 km @3REN • Caller-ID Type-1/2 FSK & ITU V.23/Bell 202 generation |
Voice Processing (signalling dependent) |
SIP • MGCP (Packet Cable NCS 1.0 & IETF MGCP 1.0) • Voice CODECs (G.711 A-Law/µ-Law (64 kbps); G.726 (ADPCM 40, 32, 24, 16 kbps); G.723.1 (5.3 or 6.3 kbps); G.729ab (8 kbps)) • G.168 echo cancellation • 4 parallel voice connections • DTMF detection & generation • carrier tone detection & generation • silence suppression & comfort noise • configurable dejitter buffer • DTFM in-band & out-of-band • configurable transmit packet length • RTP/RTCP (RFC 1889) |
Voice Services/Features |
Call forwarding • Call transfer • Call hold • Call waiting • 3-way calling |
IP Services |
IPv4 router; RIPv1, v2 (RFC 1058 & 2453) • IP filtering • NAPT • NTP • DHCP client & server • PPPoE • Programmable static routes • ICMP redirect (RFC 792); Packet fragmentation • DiffServe/ToS set or queue per header bits • VLAN support 802.1p/q • AES/DES/3DES encryption |
Fax and Modem Support |
G.711 transparent fax & T.38 fax relay (9.6 k, 14.4 k) |
Connectivity |
2 10/100 Full Duplex/Autosensing Ethernet RJ-45 |
Management |
Browser configuration interface • TFTP configuration & firmware loading • SNMP v2 agent |
Power |
100–240 VAC (50/60 Hz) |
Temperature |
0 to 40°C (32 to 104°F) |
Humidity |
Humidity: 5 to 80% (non condensing) |
Compliance |
Compliance: EMC compliance: EN55022 & EN55024 • Safety compliance: EN 50950 • CE compliance • FCC Part 15 Class B |
|
|