2007704 - Network Isolator MED MI 1005 MB
by Baaske Medical

Wall-mounted medical network isolator

• Isolation starting at the wall outlet
• Fixed installation – flush-mounted fitting
• Protects medical devices and patients against excessively high leakage currents in the data network
• Durable housing – absorbs minor impacts to protect the isolator and network connection cable
• No installation of drivers or additional software required
• Inexpensive and efficient operation. No dedicated power supply required
• Completely secure connection when coupled with Harting PushPull technology

The MED MI 1005 MB passive network isolator is specifically designed for wall mounting in medical environments. It provides galvanic network isolation for electronic medical devices and systems starting directly at the wall outlet. Once it is mounted to the wall, the isolator is well-protected by the housing. Accidental impacts can be absorbed, protecting the isolator and network cable connector from damage. The MED MI 1005 MB network isolator delivers dielectric strength up to 5 kV, up to 10 kV DC for 10 seconds under high-stress conditions. Coupled with Harting PushPull technology, an absolutely stable connection. No installation of drivers or additional software necessary because the MED MI 1005 MB network isolator behaves fully transparently on the data network.

Isolation Voltage:	5.000 V
Data Speed:	10/100/1000 MBit/s
Conformity Ethernet:	IEEE 802.3
Standards approved by:	IEC 60601-1 (3rd Edition); IEC 60601-1-2 UL 60601 (UL Listed E342310)
Connections::	2 x RJ45 input / output
Material:	UL94V-0 / RoHS-compliant
Time between failures:	0.21 x 10 ^ 8 (1 error in 21 million hours)

MED_MI_1005_MB.pdf

1,252 K