|
|
|
CL1214E/EUI - Extended Temperature CopperLink High Speed Auto Rate Extender; RJ45 Connector; 100-240VAC
by PATTON
|
|
|
|
- Ethernet Extension— Extend 10/100Base-TX Ethernet well beyond its 328-foot (100-meter) limitation over a single unshielded twisted pair (UTP) or Cat 5e/6/7 cable.
- Ruggedized—Operating temperature of -40 to 85°C and optional conformal coating to protect against condensing humidity.
- Plug and Play—Set these units up straight out of the box. No configuration is required. Auto-sensing 10/100 Ethernet ports support full or half duplex operation.
- Transparent LAN Bridging—Bypass network configuration requirements by transparently passing all higher layer protocols—including 802.1Q VLAN frames (tagged and untagged). Data-transmission mechanism is fully transparent to such IP video compression schemes as MPEG-4, H.264 and MJPEG.
- Flexible Installation—Wall-mount ready and an optional DIN rail mounting kit is available.
- Multiple Line Rates Supported—Switch-selectable rate mode options optimize rate and reach for the noise environment, wire gauge/type and length.
- Made in the USA — This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.
|
|
|
The Patton Model CL1214E-EUI delivers off-the-chart symmetrical line rates greater than 168 Mbps. Best of all—like all CopperLink™ products—the CL1214E leverages existing copper infrastructure to deliver high speed Ethernet connectivity over single twisted-pair or Cat 5e/6/7 cable.
Four user-selectable configuration profiles—combined with Patton’s auto-rate adaptation feature—ensure maximum achievable symmetrical or asymmetrical rates for the installed noise environment, wire gauge/type and length.
Symmetrical line-rate settings are ideal for such applications as remote LAN extension, video teleconferencing, and data backhaul.
Asymmetrical configurations are well-suited for applications requiring higher downstream speeds and/or longer distances between Ethernet devices. Typical asymmetrical scenarios include medical imaging, livestock monitoring, underwater video, internet gaming, and transporting high-resolution IP video from security cameras.
Realize fiber-like speed and distance without the expense of fiber with Patton’s Ultra-High-Speed CopperLink™ Ethernet Extenders.
| Rate/Reach |
- Long Range Asymmetrical:
250 feet (73 m): Downstream (DS)]67 Mbps/Upstream (US) 16 Mbps
10,000 feet (3 km): DS 4 Mbps/US 263 kbps
- Long Range Symmetrical:
250 feet (73 m): DS 68 Mbps/ US 50 Mbps
10,000 feet (3 km): DS 2.5 Mbps/US 1 Mbps
- High Speed Asymmetrical:
250 feet (73 m): DS 168 Mbps/US 95 Mbps
3,500 feet (1 km): DS 35 Mbps/US 1 Mbps
- High Speed Symmetrical:
250 feet (73 m): DS 121 Mbps/US 144 Mbps
3,500 feet (1 km): DS 30 Mbps/US 4 Mbps
|
| CopperLink Line Interface |
- RJ-45 (pin 4 = ring; pin 5 = tip)
- Terminal block, 2-position
|
| CopperLink Line Modulation |
DMT (Discrete Multi-Tone) |
| Enclosure |
IP 40 rated • aluminum |
| Ethernet Interface (x4) |
8-position shielded RJ-45. Auto-sensing 10/100Base-TX with half or full duplex operation. |
| Protocol |
Transparent to high layer protocols: supports 802.1Q VLAN tagged or untagged frames. Transparent to IP Video schemes: fully transparent to such compression schemes as MPEG-4, H.264, and MJPEG. |
| Impulse Noise Protection Modes |
Selectable fast and interleave modes |
| Target SNR Modes |
6 dB & 9 dB |
| Management |
8-position DIP switch |
| Monitoring |
8 LEDs display Power, Link, Ethernet 1–4, Remote, and Local status. |
| Power Supply |
External AC: 100–240 VAC
Internal DC: -12 VDC |
| Compliance |
FCC Part 15A, CE Mark, EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC |
| Dimensions |
6.22 W x 1.25 H x 4.75 L in. (15.74 W x 3.18 H x 12.07 L cm) |
| Weight |
0.4 lbs (181 g) |
|
|
